Publications

Refine Results

(Filters Applied) Clear All

Wind information requirements for NextGen applications phase 7 report

Summary

This report details the Required Time of Arrival (RTA) performance of B757 aircraft arriving at various meter fixes across a range of altitudes from 33,000' down to 3,000' above ground level (AGL). The system tested demonstrated less than ±10 second arrival error in at least 95% of flights at meter fixes down to 7,000' AGL regardless of the forecast quality provided. Below 7,000' AGL, RTA performance significantly degraded demonstrating around 80% compliance under the best forecast and operating conditions. This report also provides a comprehensive lexicon of aviation and air traffic control related "wind" terms.
READ LESS

Summary

This report details the Required Time of Arrival (RTA) performance of B757 aircraft arriving at various meter fixes across a range of altitudes from 33,000' down to 3,000' above ground level (AGL). The system tested demonstrated less than ±10 second arrival error in at least 95% of flights at meter...

READ MORE

Wind information requirements for NextGen operations, phase 5 report

Published in:
MIT Lincoln Laboratory Report ATC-439

Summary

NextGen applications with time-based control elements, such as required time of arrival (RTA) at a meter fix under 4D trajectory-based operations (4D-TBO)/time of arrival control (TOAC) procedures or assigned spacing goal between aircraft under Interval Management (IM) procedures, are subject to the quality of the atmospheric forecast utilized by participating aircraft. The work described in this report summarizes the major activities conducted in the current phase of this program which builds upon prior work. The major objectives were: 1. Support RTCA Special Committee-206 Aeronautical Information and Meteorological Data Link Services and co-chair a sub-group responsible for developing the document "Guidance for Data Linking Forecast and Real-Time Wind Information to Aircraft." 2. Analyze the performance of publicly available forecast as compared to in-situ reported atmospheric conditions, specifically comparing Global Forecast System (GFS) and High Resolution Rapid Refresh (HRRR) forecast data to recorded in-flight weather Meteorological Data Collection and Reporting System (MDCRS) data. 3. Analyze current and future Flight Management Systems (FMSs) to conduct operations at significantly lower altitudes than previous studies. 4. Evaluate potential sources of aircraft-derived winds to better support 4D-TBO activities. 5. Provide recommendations for high-value future work.
READ LESS

Summary

NextGen applications with time-based control elements, such as required time of arrival (RTA) at a meter fix under 4D trajectory-based operations (4D-TBO)/time of arrival control (TOAC) procedures or assigned spacing goal between aircraft under Interval Management (IM) procedures, are subject to the quality of the atmospheric forecast utilized by participating...

READ MORE

Wind information requirements for NextGen applications phase 4 final report

Published in:
MIT Lincoln Laboratory Report ATC-431

Summary

The success of many NextGen applications with time-based control elements, such as Required Time of Arrival (RTA) at a meter fix under 4D-Trajectory Based Operations (4D-TBO/Time of Arrival Control (TOAC) procedures or compliance to an Assigned Spacing Goal (ASG) between aircraft under Interval Management (IM) procedures, are subject to the quality of the atmospheric forecast utilized by participating aircraft. Erroneous information derived from provided forecast data, such as the magnitude of future headwinds relative to the headwinds actually experienced during flight, or forecast data that is insufficient to fully describe the forthcoming atmospheric conditions, can significantly degrade the performance of an attempted procedure. The work described in this report summarizes the major activities conducted in Fiscal Year 2015.
READ LESS

Summary

The success of many NextGen applications with time-based control elements, such as Required Time of Arrival (RTA) at a meter fix under 4D-Trajectory Based Operations (4D-TBO/Time of Arrival Control (TOAC) procedures or compliance to an Assigned Spacing Goal (ASG) between aircraft under Interval Management (IM) procedures, are subject to the...

READ MORE

Wind Information Requirements for NextGen Applications - Phase 3 Final Report(3.98 MB)

Published in:
Project Report ATC-422, MIT Lincoln Laboratory

Summary

Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. The work described in this report summarizes the activities conducted in FY14, which builds upon prior work.
READ LESS

Summary

Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. The work described in...

READ MORE

Wind information requirements for NextGen applications, phase 3 final report

Published in:
MIT Lincoln Laboratory Report ATC-422

Summary

Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. Any errors in the ground and/or aircraft wind information relative to the truth winds actually flown through can significantly degrade the performance of the procedure. Unacceptable performance could be mitigated by improving wind information in the aircraft, for example, by using higher accuracy wind forecast models to generate wind inputs for the ground or airborne systems, updating wind information more frequently, or to upgrade the way winds are handled in the avionics systems. The work described in this report summarizes the activities conducted in FY14, which builds upon prior work. It (1) establishes the relationship of wind information accuracy to 4D-TBO and IM performance for a selection of operationally relevant scenarios to identify wind needs to support them, and (2) presents examples of what wind information content and update rate to the aircraft will deliver a given target performance level to help inform concept of operations development and datalink technology needs.
READ LESS

Summary

Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. Any errors in the...

READ MORE

Showing Results

1-5 of 5