Publications

This paper describes a method of enhancing the bandwidth of two different electromagnetically coupled microstrip antennas by utilization of a tuning stub. An approximate theory and equations are developed to demonstrate the potential bandwidth improvement and required stub impedance characteristics. A novel dual-stub design is presented that achieves better characteristics...

We report the first successful demonstration of a photomixer local oscillator (LO) integrated with a superconducting heterodyne detector. The photomixer LO generated the difference frequency of two diode lasers by optical heterodyne conversion in low-temperature-grown GaAs. The measured receiver noise temperature, 331 K at 630 GHz, compares favorably with that...

A photomixer local oscillator (LO) operating at the 630-GHz difference frequency of two laser diodes was successfully demonstrated with a heterodyne detector based on a niobium superconducting tunnel junction. The low-temperature-grown GaAs photomixer generated 0.20 uW in the input spatial mode of the receiver. Using the photmixer LO, the double-sideband...

This paper describes the design and testing of an aperture-coupled circularly polarized antenna for global positioning satellite (GPS) applications. The antenna operates at both the L1 and L2 frequencies of 1575 and 1227 MHz, which is required for differential GPS systems in order to provide maximum positioning accuracy. Electrical performance...

The explosion of interest in high data rate communications places great demands on current antenna designs. Antennas used for transmitting signals can require high gain with high radiated power. An efficient means to accomplish these goals is the free space combining of many amplifiers via elements in an antenna array...

Spatial power combining of many MMIC amplifiers at millimeter wave frequencies using a fixed array of microstrip antenna elements places unique demands on dielectric media. The substrate must be relatively thick to allow space for MMIC placement, must provide rather high thermal conductivity to disipate MMIC heat, and be of...

We describe the design and measurement of a hybrid-circuit, tile-approach subarray for use in spatial power-combined transmitters. The subarray consists of 16 monolithic millimeter-wave integrated circuit (MMIC) amplifiers, each feeding a circularly polarized cavity-backed microstrip antenna. The average performance across the 43.5-45.5 GHz band is as follows: EIRP 18.3 dBW...

Three designs for a 4-by-4 are described for use in a spatial power-combined transmitter. The subarrays are constructed using a hybrid-circuit, tile-approach architecture and are composed of 16 cavity-backed, proximity-coupled microstrip antennas, each fed by a 0.5 watt amplifier. Both linearly and circularly polarized subarrays have been constructed for operation...

The radiation efficiency of conventional microstrip antennas generally decreases when the substrate thickness or permittivity is increased because of loss to surface waves. However, constructing a metal cavity around the microstrip antenna prevents the surface wave propagation. Thus, the cavity backed microstrip antenna has been predicted to have increased radiation...