Publications
GPS-squitter interference analysis
April 6, 1995
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-229
Summary
GPS-Squitter is a system concept that merges the capabilities of Automatic Dependent Surveillance (ADS) and the Mode S beacon radar. The result is an integrated concept for seamless surveillance (ADS) and the Mode S beacon radar. The result is an integrated concept for seamless surveillance and data link that permits equipped aircraft to participate in ADS and/or beacon ground environments, offering many possibilities for transition from a beacon to an ADS-based environment. Since GPS-Squitter and its associated data link share the 1030/1090-MHz beacon frequencies with other users (e.g., ground beacon radars and TCAS), there is some level of interaction between the operation of these various systems. One form of interaction is the effect on GPS-Squitter operation caused by the activities of other users. This effect, plus the effect of self-interference of GPS-Squitter operation, determines the operational capacity of GPS-Squitter. The complementary process is the effect of the GPS-Squitter operation on the other users of the beacon frequencies. This report provides an analysis of the interference to the other users of the 1030/1090-MHz beacon frequencies caused by GPS-Squitter operation. The principal interference effect is channel occupancy on the beacon frequencies that prevents the reception of a desired signal by a receiver. The basis for the analysis is to estimate the channel occupancy on the beacon frequencies and its effect on the operation of victim receivers on those frequencies. The analysis is performed separately for the two frequencies. The analysis of 1030-MHz interference estimates the effect of the 1030-MHz data link activity that may be associated with GPS-Squitter (such as differential correction broadcast and two-way data link) on the operation of a transponder receiver. The 1090-MHz analysis estimates similar interference effects on (1) a terminal or en route sensor receiver and (2) a TCAS receiver. The results indicate that the operation of GPS-Squitter and its associated data link will have a negligible effect on the other users of these frequencies.
Summary
GPS-Squitter is a system concept that merges the capabilities of Automatic Dependent Surveillance (ADS) and the Mode S beacon radar. The result is an integrated concept for seamless surveillance (ADS) and the Mode S beacon radar. The result is an integrated concept for seamless surveillance and data link that permits...
READ MORE
GPS-squitter capacity analysis
May 20, 1994
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-214
Summary
GPS-Squitter is a system concept that merges the capabilities of Automatic Dependent SurveiIlance (ADS) and the Mode S beacon radar. The resuit is an integrated concept for seamless surveillance and data link that permits equipped aircraft to participate in ADS and/or beacon ground environments. This concept offers many possibilities for transition from a beacon to an ADS-based environment. This report provides the details of the techniques used to estimate GPS-Squitter surveillance and data link capacity. Surveillance capacity of airborne aircraft is calculated for the omni and six-sector ground stations. Next, the capacity of GPS-Squitter for surface traffic is estimated. The interaction between airborne and surface operations is addressed to show de independence of these systems. Air ground data link capacity for GPS-Squitter is estimated, together with an estimate of the use of the Mode S link to support other ground surveillance and data link activities as well as TCAS operation. The analysis indicates the low transponder occupancy resulting from the total effect of these activities. Low occupancy is a key requirement in avoiding interference with the operation of the current ATCRRS and future Mode S interrogators.
Summary
GPS-Squitter is a system concept that merges the capabilities of Automatic Dependent SurveiIlance (ADS) and the Mode S beacon radar. The resuit is an integrated concept for seamless surveillance and data link that permits equipped aircraft to participate in ADS and/or beacon ground environments. This concept offers many possibilities for...
READ MORE
Radar images of Logan Airport and application in automated aircraft tracking
April 4, 1994
Conference Paper
Published in:
SPIE, Vol. 2220, Sensing, Imaging, and Vision for Control and Guidance of Aerospace Vehicles, 4-5 April 1994, pp. 316-327.
Summary
To enhance safety and expedite aircraft traffic control at airports, the Federal Aviation Administration (FAA) is in the process of developing automation aids for controllers and pilots. These automation improvements depend on reliable surveillance of the airport traffic, in the form of computerized target reports for all aircraft. One means of surveillance of the airport is primary radar. A short range radar of this type is called airport surface detection equipment or (ASDE). Lincoln Laboratory is participating in this development program by testing a system of surveillance and automation aids at Logan International Airport in Boston, Mass. This work is sponsored by the FAA. This paper describes the radar equipment being used for surface surveillance at Logan Airport and the characteristics of the radar images it produces. Techniques for automatic tracking of this radar data are also described along with a summary of the tracking performance that has been achieved. Two companion papers in this session relate to this same radar surveillance and provide more in-depth descriptions of the radar processing.
Summary
To enhance safety and expedite aircraft traffic control at airports, the Federal Aviation Administration (FAA) is in the process of developing automation aids for controllers and pilots. These automation improvements depend on reliable surveillance of the airport traffic, in the form of computerized target reports for all aircraft. One means...
READ MORE
Target detection using radar images of an airport surface
April 4, 1994
Conference Paper
Published in:
SPIE, Vol. 2220, Sensing, Imaging, and Vision for Control and Guidance of Aerospace Vehicles, 4-5 April 1994, pp. 338-356.
Summary
Automation aids which increase the efficiency of the controller and enhance safety are being sought by the Federal Aviation Administration (FAA). This paper describes the target detection algorithms developed by the MIT Lincoln Laboratory as part of the airport surface traffic automation (ASTA) and runway surface safety light system (RSLS) programs sponsored by the FAA that were demonstrated at Logan International Airport in Boston, Mass. from September 1992 through December 1993. A companion paper to this conference describes the ASTA and RSLS system demonstration. Another companion paper describes the tracking algorithms. Real-time, parallel processing implementations of these surveillance algorithms are written in C++ on a Silicon Graphics Inc. Unix multiprocessor. The heavy reliance on commercial hardware, standard operating systems, object oriented design, and high-level computer languages allows a rapid transition from a research environment to a production environment.
Summary
Automation aids which increase the efficiency of the controller and enhance safety are being sought by the Federal Aviation Administration (FAA). This paper describes the target detection algorithms developed by the MIT Lincoln Laboratory as part of the airport surface traffic automation (ASTA) and runway surface safety light system (RSLS)...
READ MORE
Aircraft surveillance based on GPS position broadcasts from mode S beacon transponders
January 1, 1994
Conference Paper
Published in:
Proc. of ION GPS, v 1, 1994, pp. 939-950.
Summary
Flight testing of a new air surveillance concept, GPS-Squitter, is reported. It integrates GPS receivers with the existing secondary surveillance radar beacon equipment carried by most aircraft. Simple, inexpensive, non-scanning ground stations listen for GPS position reports broadcast by the Mode S beacon transponders on the aircraft and send them on to air traffic control facilities. In addition to its surveillance application, GPS-Squitter presents opportunities for enhancing other important functions such as collision avoidance systems and data link services. System tradeoff studies are comparing range and altitude coverage with the cost and number of stations needed. Other issues are data link interference, multipath, total aircraft capacity, and unambiguous reporting range. The baseline system uses commercial off-the-shelf components such as TCAS (Traffic Alerting and Collision Avoidance System) avionics units, omni-directional DME (Distance Measuring Equipment) antennas, and computer workstations in order to ensure low production costs. The cost/performance tradeoff of minimum modifications such as the addition of a 6-sector antenna, multiple receive channels, or higher transmit power, are being evaluated. The omni-directional baseline system is designed for a range of 50 nmi while the 6-sector system is designed for 100 nmi range. Two aircraft have been equipped with Mode S beacon transponders modified to broadcast (i.e., "squitter") their GPS position twice each second. The numerous test flights have accumulated a significant data base including a demonstration of coverage out to over 100 nmi range. Data have been collected to analyze a number of issues: received power margins, performance of bottom versus top aircraft antenna, ground bounce multipath, propagation over water, and parallel runway approach monitoring. In addition, standard squitter data from commercial aircraft have been recorded and correlated with Mode S tracking to show link margins experienced in practice from aircraft in operational service. More tests are planned, including a demonstration of GPS-Squitter air surveillance in the Gulf of Mexico.
Summary
Flight testing of a new air surveillance concept, GPS-Squitter, is reported. It integrates GPS receivers with the existing secondary surveillance radar beacon equipment carried by most aircraft. Simple, inexpensive, non-scanning ground stations listen for GPS position reports broadcast by the Mode S beacon transponders on the aircraft and send them...
READ MORE
TCAS: a system for preventing midair collisions
January 1, 1989
Journal Article
Published in:
Lincoln Laboratory Journal, Vol. 2, No. 3, Fall 1989, pp. 437-458.
Summary
To reduce the possibility of midair collisions, the Federal Aviation Administration has developed the Traffic Alert and Collision Avoidance System, or TCAS. This airborne system senses the presence of nearby aircraft by interrogating the transponders carried by these aircraft. When TCAS senses that a nearby aircraft is a possible collision threat, TCAS issues a traffic advisory to the pilot, indicating the presence and location of the other aircraft. If the encounter becomes hazardous, TCAS issues a maneuver advisory.
Summary
To reduce the possibility of midair collisions, the Federal Aviation Administration has developed the Traffic Alert and Collision Avoidance System, or TCAS. This airborne system senses the presence of nearby aircraft by interrogating the transponders carried by these aircraft. When TCAS senses that a nearby aircraft is a possible collision...
READ MORE
TCAS Experimental Unit (TEU) hardware description
June 6, 1986
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-133
Summary
This report describes the hardware design of the TCAS Experimental Units (TEU's) constructed by Lincoln Laboratory to support the design and validation of the Traffic Alert and Collision Avoidance System (TCAS) for the FAA. Section 1.0 presents an overview of the operation of hte TEU's, in order to give some context for the hardware design. References are given to more extensive descriptions of the TCAS system operation and software design. Section 2.0 constitutes the bulk of the report, and is a detailed description of the TEU hardware design. The purpose of this description is to document the design details of the equipment which was used to develop and validate the signal processing techniques and algorithms which appear in the TCAS II Minimum Operational Performance Standard, the TCAS National Standard and various technical reports listed in the references. A second purpose is to provide design guidance to potential TCAS II manufacturers, in the form of a detailed description of a feasible design with documented performance. Finally, this document is a manual for future use and maintenance of the TEU's.
Summary
This report describes the hardware design of the TCAS Experimental Units (TEU's) constructed by Lincoln Laboratory to support the design and validation of the Traffic Alert and Collision Avoidance System (TCAS) for the FAA. Section 1.0 presents an overview of the operation of hte TEU's, in order to give some...
READ MORE
TCAS-II: design and validation of the high-traffic-density surveillance subsystem
February 12, 1985
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-126
Summary
Lincoln Laboratory, under FAA sponsorship, is developing an airborne collision avoidance system (TCAS II), concentrating primarily on the air-to-air surveillance subsystem. The surveillance functions required are to detect the presence of nearby transponder equipped aircraft, and then generate a surveillance track on each aircraft, issuing range and altitude reports once per second. The development effort from mid-1981 to the present has focused on the surveillance problems associated with high aircraft density. A number of surveillance techniques to deal with the high density environment have been identified and evaluated mainly through airborne measurements. A TCAS II design was synthesized, and this design was subjected to in-flight testing in the Los Angeles Basin using a Boeing 727. Results indicate that the performance objectives have been met.
Summary
Lincoln Laboratory, under FAA sponsorship, is developing an airborne collision avoidance system (TCAS II), concentrating primarily on the air-to-air surveillance subsystem. The surveillance functions required are to detect the presence of nearby transponder equipped aircraft, and then generate a surveillance track on each aircraft, issuing range and altitude reports once...
READ MORE
Development of surveillance techniques for TCAS II
March 5, 1984
Conference Paper
Published in:
IEE Colloquium on Airborne Collision Avoidance, London, Uk, 5 March 1984, PP. 2/1-2/4.
Summary
In the development program of airborne collision avoidance, the equipment intended for installation on air carriers is designated TCAS 11 in the United States. A TCAS 11 installation my be thought of as consisting of two major subsystems: (1) air-to-air surveillance, and (2) control logic (including the logical tests that decide when another aircraft is dangerously close, algorithm that select an appropriate vertical resolution advisory, and a display of the advisory to the pilot). This paper focuses on the air-to-air surveillance subsystem. It identifies the disturbance phenomena that affect performance, presents a number of techniques that have been developed to overcome these difficulties, and presents performance measurements made through airborne testing. A TCAS II installation carries out surveillance in both Mode S and Mode C. The former is used for all Mode S aircraft, including other TCAS II aircraft. The latter is used for all other aircraft, provided they are equipped to reply in Mode C. This paper concentrates on surveillance in Mode C, which is by far the more demanding case.
Summary
In the development program of airborne collision avoidance, the equipment intended for installation on air carriers is designated TCAS 11 in the United States. A TCAS 11 installation my be thought of as consisting of two major subsystems: (1) air-to-air surveillance, and (2) control logic (including the logical tests that...
READ MORE
A traffic alert and collision avoidance system for general aviation
October 1, 1983
Conference Paper
Published in:
IEEE/AIAA 5th Digital Avionics Systems Conf., Seattle, WA, 31 October - 3 November 1983, pp. 20.
Summary
One component of the Federal Aviation Administration approach to independent aircraft separation assurance is known as the Traffic Alert and Collision Avoidance System I (TCAS I), which employs passive or active techniques for the detection of nearby transponder-equipped aircraft. This paper gives the results of a study conducted by Lincoln Laboratory of simple techniques for the passive and active detection of transponders. Filter criteria that may be used to restrict passive detections to potentially threatening aircraft are described and evaluated. These techniques and criteria were used in a candidate passive detector whose performance was evaluated in flight against targets of opportunity. A candidate low-power active interrogator was also evaluated through link calculations and airborne measurements. The results indicate that a low-power active interrogator can provide more reliable detection of nearby aircraft and a lower false alert rate than any of the simple passive techniques considered. The active technique generates insignificant levels of interference and, unlike a passive system, also provides protection in regions where there are no ground interrogators.
Summary
One component of the Federal Aviation Administration approach to independent aircraft separation assurance is known as the Traffic Alert and Collision Avoidance System I (TCAS I), which employs passive or active techniques for the detection of nearby transponder-equipped aircraft. This paper gives the results of a study conducted by Lincoln...
READ MORE