Publications

Refine Results

(Filters Applied) Clear All

Mode-S data link

Published in:
J. of ATC, June 1993, pp. 34-37.

Summary

Mode-S is an enhancement of the ATCRBS secondary surveillance radar (SSR) system which adds selective interrogation of individual aircraft, monopulse processing of the replies and a digital data link between the ground station and the aircraft. These features result in greatly improved surveillance accuracy, virtual elimination of synchronous garble of the replies from closely spaced aircraft, and provide a high capacity digital communication link for a wide variety of ground/air/ground messages.
READ LESS

Summary

Mode-S is an enhancement of the ATCRBS secondary surveillance radar (SSR) system which adds selective interrogation of individual aircraft, monopulse processing of the replies and a digital data link between the ground station and the aircraft. These features result in greatly improved surveillance accuracy, virtual elimination of synchronous garble of...

READ MORE

Mode S beacon system: functional description (revision D)

Published in:
MIT Lincoln Laboratory Report ATC-42-D

Summary

This document provides a functional description of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current ATC beacon system, and may be implemented at low user cost over an extended transition period. Mode S will provide the surveillance and communication performance required by the ATC automation, the reliable communications needed to support data link services, and the capability of operating with a terminal or enroute, radar digitizer-equipped, ATC surveillance radar. The material contained in this document updates and expands the information presented in "Mode S Beacon System: Functional Description", DOT/FAA/PM-83/8, 215 July 1983.
READ LESS

Summary

This document provides a functional description of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current...

READ MORE

Mode S Beacon System: Functional Description (Revision C)

Published in:
MIT Lincoln Laboratory Report ATC-42,C

Summary

This document provides a functional description of the Mode S Beacon Systme, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current ATC beacon system, and may be implemented at low user cost over an extended transition period. Mode S will provide the surveillance and communication performance required by the ATC automation, the reliable communications needed to support data link services, and the capability of operating with a terminal or enroute, radar digitizer-equipped, ATC surveillance radar. The material contained in this document updates and expands the information presented in "Mode S Beacon System: Functional Description", DOT/FAA/RD-82/52, 27 October 1982.
READ LESS

Summary

This document provides a functional description of the Mode S Beacon Systme, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current...

READ MORE

Mode S Beacon System: Functional Description (Revision B)

Published in:
MIT Lincoln Laboratory Report ATC-42,B

Summary

This document provides a functional description of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current ATC beacon system, and may be implemented at low user cost over an extended transition period. Mode S will provide the surveillance and commucation performance required by the ATC automation, the reliable communications needed to support data link services, and the capability of operating with a terminal or enroute, radar digitizer-equipped, ATC surveillance radar. The material contained in this document updates and expands the information presented in "DABS: A System Description", FAA-RD-74-189, November 1974 and "DABS: Functional Description," FAA-RD-80-41, April 1980.
READ LESS

Summary

This document provides a functional description of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current...

READ MORE

DABS: Functional Description (Revision A)

Published in:
MIT Lincoln Laboratory Report ATC-42,A

Summary

This document provides a functional description of the Discrete Address Beacon System (DABS), a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. DABS is capable of common-channel interoperation with the current ATC beacon system, and may be implemented at low user cost over an extended ATCRBS-to-DABS transition period. In supporting ATC automation, DABS will provide the surveillance and communication performance required by the Automatic Traffic Advisory and Resolution Service (ATARS), the reliable communications needed to support data link services, and the capability of operating with a terminal or enroute, radar digitizer-equipped, ATC surveillance radar. The material contained in this document updates and expands the information presented in "DABS: A System Description", FAA-RD-74-189, November 1974.
READ LESS

Summary

This document provides a functional description of the Discrete Address Beacon System (DABS), a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. DABS is capable of common-channel interoperation with the current...

READ MORE

DABS: A System Description

Published in:
MIT Lincoln Laboratory Report ATC-42

Summary

The Discrete Address Beacon System (DABS) is a cooperative surveillance and communication system for air traffic control. It employs ground-based sensors (interrogators) and airborne transponders. Ground-to-air and air-to-ground data-link communications are accommodated integrally with the surveillance interrogations and replies. DABS has been designed as an evolutionary replacement for the current Air Traffic Control Radar Beacon System (ATCRBS) to provide the enhanced surveillance and communication capability required for air traffic control in the 1980s and 1990s. Compatibility with ATCRBS has been emphasized to permit an extended, economical transition. A principal feature of DABS is that each aircraft is assigned a unique address code. Using this unique code, interrogations can be directed to a particular aircraft, and replies unambiguously identified. Channel interference is minimized because a sensor can limit its interrogation to targets of interest. In addition, by proper timing of interrogations, replies from closely-spaced aircraft can be received without mutual interference. The unique address in each intertogation and reply also permits the inclusion of data-link messages to or from a particular aircraft. DABS uses the same frequencies for interrogations and replies as ATCRBS (1030 and 1090 MHz, respectively). The DABS interrogation is transmitted using DPSK at a 4 Mbps rate, and comprises 56 or 112 bits including the 24-bit discrete address. The reply also comprises 56 or 112 bits including address, and is transmitted at 1 Mbps using binary pulse-position modulation. Coding is used on both interrogations and replies to protect against errors. The DABS sensor provides surveillance of DABS- and ATCRBS-equipped aircraft, and data-link service to DABS aircraft. In addition, it performs radar/beacon correlation of radar target reports from a collocated radar. The DABS sensor transmits surveillance data to, and exchanges messages with, air traffic control facilities (TRACONs and ARTCCs) via low-rate digital circuits. The DABS sensor communicates directly with adjacent DABS Sensors to hand off targets and to provide surveillance and communication backup in the event of momentary link failures. Each DABS service to DABS-equipped aircraft via the ground-air data link. The DABS transponder replies to both ATCRBS and DABS interrogations, and interfaces with a variety of data-link messaged display and input devices. The rms surveillance accuracy provided by DABS is the order of 100 ft and 0.1 degree in range and azimuth, respectively. Surveillance and data-link communication capacities exceed by a substantial margin projected ATC requirements through the remainder of this century.
READ LESS

Summary

The Discrete Address Beacon System (DABS) is a cooperative surveillance and communication system for air traffic control. It employs ground-based sensors (interrogators) and airborne transponders. Ground-to-air and air-to-ground data-link communications are accommodated integrally with the surveillance interrogations and replies. DABS has been designed as an evolutionary replacement for the current...

READ MORE

Provisional Signal Formats for the Discrete Address Beacon System, Revision I

Published in:
MIT Lincoln Laboratory Report ATC-30,REV.1

Summary

This document specified provisional DABS signal formats, i.e., the characteristics of the "signals-in-space" which form the DABS interrogations and replies. Also included is a discussion of the utilization of the described formats to effect the surveillance and data link communication functions for which DABS has been designed. These signal formats will be used in the design and construction of engineering development model transponders and interrogators for prototype system test and evaluation at NAFEC during Phase II of the DABS Development Program; and, with modifications resulting from this test and evaluation effort, will form the basis for the operational implementation of DABS.
READ LESS

Summary

This document specified provisional DABS signal formats, i.e., the characteristics of the "signals-in-space" which form the DABS interrogations and replies. Also included is a discussion of the utilization of the described formats to effect the surveillance and data link communication functions for which DABS has been designed. These signal formats...

READ MORE

Provisional Signal Formats for the Discrete Address Beacon System

Published in:
MIT Lincoln Laboratory Report ATC-30

Summary

This document specifies provisional DABS signal formats, i.e., the characteristics of the "signals-in-space"which for the DABS interrogations and replies. Also included is a discussion of the utilization of the described formats to effect the surveillance and data link communication functions for which DABS has been designed. These signal formats will be used in the design and construction of engineering development model transponders and interrogators for prototype system test and evaluation at NAFEC during Phase II of the DABS Development Program; and, with modifications resulting from this test and evaluation effort, will form the basis for the operational implementation of DABS.
READ LESS

Summary

This document specifies provisional DABS signal formats, i.e., the characteristics of the "signals-in-space"which for the DABS interrogations and replies. Also included is a discussion of the utilization of the described formats to effect the surveillance and data link communication functions for which DABS has been designed. These signal formats will...

READ MORE

The Discrete Address Beacon System (DABS)

Published in:
IEEE Northeast Electronic Research and Engineering Mtg., NEREM, 8 November 1973.

Summary

The requirement for additional automation in the air traffic control process has placed new emphasis on the need for high quality surveillance data and for a ground-to-aircraft data link. The ATCRBS beacon system has proven a valuable complement to radar because it provides the ground controller with position, identity, and altitude data that is not contaminated by ground and weather clutter. However, the growing number of beacon-equipped aircraft and ground interrogators and the inherent self-interference limitations of the ATCRBS beacon system have motivated the need for a more reliable and flexible beacon system. The 1969 the Air Traffic Control Advisory Committee recommended the development of such an improved system which they named the Discrete Address Beacon System (DABS), incorporating both surveillance and a data link. Since 1971, M.I.T. Lincoln Laboratory, under the sponsorship of the FAA, has been investigating various DABS design options.
READ LESS

Summary

The requirement for additional automation in the air traffic control process has placed new emphasis on the need for high quality surveillance data and for a ground-to-aircraft data link. The ATCRBS beacon system has proven a valuable complement to radar because it provides the ground controller with position, identity, and...

READ MORE

Showing Results

1-9 of 9