Publications

Refine Results

(Filters Applied) Clear All

A 64 x 64-pixel CMOS test chip for the development of large-format ultra-high-speed snapshot imagers

Summary

A 64 x 64-pixel test circuit was designed and fabricated in 0.18- m CMOS technology for investigating high-speed imaging with large-format imagers. Several features are integrated into the circuit architecture to achieve fast exposure times with low-skew and jitter for simultaneous pixel snapshots. These features include an H-tree clock distribution with local and global repeaters, single-edge trigger propagation, local exposure control, and current-steering sampling circuits. To evaluate the circuit performance, test structures are periodically located throughout the 64 x 64-pixel device. Measured devices have exposure times that can be varied between 75 ps to 305 ps with skew times for all pixels less than +-3 ps and jitter that is less than +-1.2 ps rms. Other performance characteristics are a readout noise of approximately 115 e- rms and an upper dynamic range of 310,000 e-.
READ LESS

Summary

A 64 x 64-pixel test circuit was designed and fabricated in 0.18- m CMOS technology for investigating high-speed imaging with large-format imagers. Several features are integrated into the circuit architecture to achieve fast exposure times with low-skew and jitter for simultaneous pixel snapshots. These features include an H-tree clock distribution...

READ MORE

Lincoln Laboratory high-speed solid-state imager technology

Published in:
SPIE Vol. 6279, 27th Int. Congress on High-Speed Photography and Photonics, 17-22 September 2006, 62791K.

Summary

Massachusetts Institute of Technology, Lincoln Laboratory (MIT LL) has been developing both continuous and burst solid-state focal-plane-array technology for a variety of high-speed imaging applications. For continuous imaging, a 128 ¿ 128-pixel charge coupled device (CCD) has been fabricated with multiple output ports for operating rates greater than 10,000 frames per second with readout noise of less than 10 e- rms. An electronic shutter has been integrated into the pixels of the back-illuminated (BI) CCD imagers that give snapshot exposure times of less than 10 ns. For burst imaging, a 5 cm x 5 cm, 512 x 512-element, multi-frame CCD imager that collects four sequential image frames at megahertz rates has been developed for the Los Alamos National Laboratory Dual Axis Radiographic Hydrodynamic Test (DARHT) facility. To operate at fast frame rates with high sensitivity, the imager uses the same electronic shutter technology as the continuously framing 128 x 128 CCD imager. The design concept and test results are described for the burst-frame-rate imager. Also discussed is an evolving solid-state imager technology that has interesting characteristics for creating large-format x-ray detectors with ultra-short exposure times (100 to 300 ps). The detector will consist of CMOS readouts for high speed sampling (tens of picoseconds transistor switching times) that are bump bonded to deep-depletion silicon photodiodes. A 64 x 64-pixel CMOS test chip has been designed, fabricated and characterized to investigate the feasibility of making large-format detectors with short, simultaneous exposure times.
READ LESS

Summary

Massachusetts Institute of Technology, Lincoln Laboratory (MIT LL) has been developing both continuous and burst solid-state focal-plane-array technology for a variety of high-speed imaging applications. For continuous imaging, a 128 ¿ 128-pixel charge coupled device (CCD) has been fabricated with multiple output ports for operating rates greater than 10,000 frames...

READ MORE

High-speed, electronically shuttered solid-state imager technology

Published in:
Rev. Sci. Instrum. Vol. 74, No. 3, Pt. II, March 2003, pp. 2027-2031 (Proceedings of the 14th Topical Conference on High-Temperature Plasma Diagnostics, 8-11 July 2002)

Summary

Electronically shuttered solid-state imagers are being developed for high-speed imaging applications. A 5 cmx5 cm, 512x512-element, multiframe charge-coupled device (CCD) imager has been fabricated for the Los Alamos National Laboratory DARHT facility that collects four sequential image frames at megahertz rates. To operate at fast frame rates with high sensitivity, the imager uses an electronic shutter technology designed for back-illuminated CCDs. The design concept and test results are described for the burst-frame-rate imager. Also discussed is an evolving solid-state imager technology that has interesting characteristics for creating large-format x-ray detectors with short integration times (100 ps to 1 ns). Proposed device architectures use CMOS technology for high speed sampling (tens of picoseconds transistor switching times). Techniques for parallel clock distribution, that triggers the sampling of x-ray photoelectrons, will be described that exploit features of CMOS technology.
READ LESS

Summary

Electronically shuttered solid-state imagers are being developed for high-speed imaging applications. A 5 cmx5 cm, 512x512-element, multiframe charge-coupled device (CCD) imager has been fabricated for the Los Alamos National Laboratory DARHT facility that collects four sequential image frames at megahertz rates. To operate at fast frame rates with high sensitivity...

READ MORE

Showing Results

1-3 of 3