Publications

Refine Results

(Filters Applied) Clear All

Picosecond kilohertz-class cryogenically cooled multistage Yb-doped chirped pulse amplifier

Published in:
Opt. Lett., Vol. 42, No. 4, 15 February 2017, pp. 707-710.

Summary

A multistage cryogenic chirped pulse amplifier has been developed, utilizing two different Yb-doped gain materials in subsequent amplifier stages. A Yb:GSAG regenerative amplifier followed by a Yb:YAG power amplifier is able to deliver pulses with a broader bandwidth than a system using only one of these two gain media throughout. We demonstrate 90 mJ of pulse energy (113 W of average power) uncompressed and 67 mJ (84 W of average power) compressed at 1.25 kHz pulse repetition frequency, 3.0 ps FWHM Gaussian pulse width, and near-diffraction-limited (M^2 < 1.3) beam quality.
READ LESS

Summary

A multistage cryogenic chirped pulse amplifier has been developed, utilizing two different Yb-doped gain materials in subsequent amplifier stages. A Yb:GSAG regenerative amplifier followed by a Yb:YAG power amplifier is able to deliver pulses with a broader bandwidth than a system using only one of these two gain media throughout...

READ MORE

Four-tap RF canceller evaluation for indoor in-band full-duplex wireless operation

Published in:
IEEE Radio and Wireless Symp., RWS 2017, 15-18 January 2017.
Topic:
R&D group:

Summary

Analog self-interference mitigation techniques are currently being investigated in a variety of operational settings for In-Band Full-Duplex (IBFD) systems. The significant multipath effects of realistic environments, such as inside buildings, can severely limit performance. The influence of different transceiver parameters on the effectiveness of a four-tap RF canceller using a tapped delay line architecture was characterized with a set of indoor measurements. The prototype canceller yielded up to 30 dB of cancellation over bandwidths ranging from 10 to 120 MHz centered at 2.45 GHz, and produced a combined analog system isolation that reached above 85 dB.
READ LESS

Summary

Analog self-interference mitigation techniques are currently being investigated in a variety of operational settings for In-Band Full-Duplex (IBFD) systems. The significant multipath effects of realistic environments, such as inside buildings, can severely limit performance. The influence of different transceiver parameters on the effectiveness of a four-tap RF canceller using a...

READ MORE

Spatially-resolved individual particle spectroscopy using photothermal modulation of Mie scattering

Summary

We report a photothermal modulation of Mie scattering (PMMS) method that enables concurrent spatial and spectral discrimination of individual micron-sized particles. This approach provides a direct measurement of the "fingerprint" infrared absorption spectrum with the spatial resolution of visible light. Trace quantities (tens of picograms) of material were deposited onto an infrared transparent substrate and simultaneously illuminated by a wavelength-tunable intensity-modulated quantum cascade pump laser and a continuous-wave 532 nm probe laser. Absorption of the pump laser by the particles results in direct modulation of the scatter field of the probe laser. The probe light scattered from the interrogated region is imaged onto a visible camera, enabling simultaneous probing of spatially-separated individual particles. By tuning the wavelength of the pump laser, the IR absorption spectrum is obtained. Using this approach, we measured the infrared absorption spectra of individual 3 um PMMA and silica spheres. Experimental PMMS signal amplitudes agree with modeling using an extended version of the Mie scattering theory for particles on substrates, enabling the prediction of the PMMS signal magnitude based on the material and substrate properties.
READ LESS

Summary

We report a photothermal modulation of Mie scattering (PMMS) method that enables concurrent spatial and spectral discrimination of individual micron-sized particles. This approach provides a direct measurement of the "fingerprint" infrared absorption spectrum with the spatial resolution of visible light. Trace quantities (tens of picograms) of material were deposited onto...

READ MORE

Suppressing relaxation in superconducting qubits by quasiparticle pumping

Summary

Dynamical error suppression techniques are commonly used to improve coherence in quantum systems. They reduce dephasing errors by applying control pulses designed to reverse erroneous coherent evolution driven by environmental noise. However, such methods cannot correct for irreversible processes such as energy relaxation. We investigate a complementary, stochastic approach to reducting errors: instead of deterministically reversing the unwanted qubit evolution, we use control pulses to shape the noise environment dynamically. in the context of superconducting qubits, we implement a pumping sequence to reduce the number of unpaired electrons (quasiparticles) in close proximity to the device. A 70% reduction in the quasiparticle density reesults in a threefold enhancement in qubit relaxation times and a comparable reduction in coherence variablity.
READ LESS

Summary

Dynamical error suppression techniques are commonly used to improve coherence in quantum systems. They reduce dephasing errors by applying control pulses designed to reverse erroneous coherent evolution driven by environmental noise. However, such methods cannot correct for irreversible processes such as energy relaxation. We investigate a complementary, stochastic approach to...

READ MORE

High performance, 3D-printable dielectric nanocomposites for millimeter wave devices

Summary

The creation of millimeter wave, 3D-printable dielectric nanocomposite is demonstrated. Alumina nanoparticles were combined with styrenic block copolymers and solvent to create shear thinning, viscoelastic inks that are printable at room temperature. Particle loadings of up to 41 vol % were achieved. Upon being dried, the highest-performing of these materials has a permittivity of 4.61 and a loss tangent of 0.00298 in the Ka band (26.5-40 GHz), a combination not previously demonstrated for 3D printing. These nanocomposite materials were used to print a simple resonator device with predictable pass-band features.
READ LESS

Summary

The creation of millimeter wave, 3D-printable dielectric nanocomposite is demonstrated. Alumina nanoparticles were combined with styrenic block copolymers and solvent to create shear thinning, viscoelastic inks that are printable at room temperature. Particle loadings of up to 41 vol % were achieved. Upon being dried, the highest-performing of these materials...

READ MORE

Biomimetic sniffing improves the detection performance of a 3D printed nose of a dog and a commercial trace vapor detector

Published in:
Scientific Reports, Vol. 6 , art. no. 36876, December 2016. DOI: 10.1038/srep36876.

Summary

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog's nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the "aerodynamic reach" for inspiration of otherwise inaccessible odors. Chemical sampling and detection experiments quantified two modes of operation with the artificial nose-active sniffing and continuous inspiration-and demonstrated an increase in odorant detection by a factor of up to 18 for active sniffing. A 16-fold improvement in detection was demonstrated with a commercially-available explosives detector by applying this bio-inspired design principle and making the device "sniff" like a dog. These lessons learned from the dog may benefit the next-generation of vapor samplers for explosives, narcotics, pathogens, or even cancer, and could inform future bio-inspired designs for optimized sampling of odor plumes.
READ LESS

Summary

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog's nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the "aerodynamic reach" for inspiration of...

READ MORE

The role of master clock stability in quantum information processing

Published in:
npj Quantum Inf., Vol. 2, 8 November 2016, doi:10.1038/npjqi.2016.33.

Summary

Experimentalists seeking to improve the coherent lifetimes of quantum bits have generally focused on mitigating decoherence mechanisms through, for example, improvements to qubit designs and materials, and system isolation from environmental perturbations. In the case of the phase degree of freedom in a quantum superposition, however, the coherence that must be preserved is not solely internal to the qubit, but rather necessarily includes that of the qubit relative to the 'master clock' (e.g., a local oscillator) that governs its control system. In this manuscript, we articulate the impact of instabilities in the master clock on qubit phase coherence and provide tools to calculate the contributions to qubit error arising from these processes. We first connect standard oscillator phase-noise metrics to their corresponding qubit dephasing spectral densities. We then use representative lab-grade and performance-grade oscillator specifications to calculate operational fidelity bounds on trapped-ion and superconducting qubits with relatively slow and fast operation times. We discuss the relevance of these bounds for quantum error correction in contemporary experiments and future large-scale quantum information systems, and consider potential means to improve master clock stability.
READ LESS

Summary

Experimentalists seeking to improve the coherent lifetimes of quantum bits have generally focused on mitigating decoherence mechanisms through, for example, improvements to qubit designs and materials, and system isolation from environmental perturbations. In the case of the phase degree of freedom in a quantum superposition, however, the coherence that must...

READ MORE

Covariance estimation in terms of Stokes parameters with application to vector sensor imaging

Published in:
2016 Asilomar Conf. on Signals, Systems and Computers, Asilomar 2016, 6-9 November 2016.

Summary

Vector sensor imaging presents a challenging problem in covariance estimation when allowing arbitrarily polarized sources. We propose a Stokes parameter representation of the source covariance matrix which is both qualitatively and computationally convenient. Using this formulation, we adapt the proximal gradient and expectation maximization (EM) algorithms and apply them in multiple variants to the maximum likelihood and least squares problems. We also show how EM can be cast as gradient descent on the Riemannian manifold of positive definite matrices, enabling a new accelerated EM algorithm. Finally, we demonstrate the benefits of the proximal gradient approach through comparison of convergence results from simulated data.
READ LESS

Summary

Vector sensor imaging presents a challenging problem in covariance estimation when allowing arbitrarily polarized sources. We propose a Stokes parameter representation of the source covariance matrix which is both qualitatively and computationally convenient. Using this formulation, we adapt the proximal gradient and expectation maximization (EM) algorithms and apply them in...

READ MORE

Large enhancement of third-order nonlinear effects with a resonant all-dielectric metasurface

Published in:
AIP Adv., Vol. 6, No. 11, 1 November 2016, 115213.

Summary

A novel low-profile nonlinear metasurface, consisting of a single-layer of all-dielectric material, is proposed and numerically investigated by a nonlinear full-wave finite-difference time-domain (FDTD) method. The proposed metasurface is transparent for low, and opaque for high values of incident light intensity. The metasurface design is broadly applicable to enhancement of intrinsic nonlinearities of any material with a sufficiently high refractive index contrast. We illustrate the ability of this design to enhance intrinsic nonlinear absorption of a transition metal oxide, vanadium pentoxide (V2O5), with resonant metasurface elements. The complex third-order nonlinear susceptibility (x^(3)) for V2O5, representing both nonlinear refraction and absorption is considered in FDTD simulations. Our design achieves high initial transparency (>90%) for low incident light intensity. An order of magnitude decrease in the required input light intensity threshold for nonlinear response of the metasurface is observed in comparison with an unpatterend film. The proposed all-dielectric metasurface in this work is ultrathin and easy to fabricate. We envision a number of applications of this design for thin film coatings that offer protection against high-power laser radiation.
READ LESS

Summary

A novel low-profile nonlinear metasurface, consisting of a single-layer of all-dielectric material, is proposed and numerically investigated by a nonlinear full-wave finite-difference time-domain (FDTD) method. The proposed metasurface is transparent for low, and opaque for high values of incident light intensity. The metasurface design is broadly applicable to enhancement of...

READ MORE

The flux qubit revisited to enhance coherence and reproducibility

Summary

The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). In this work, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad frequency tunability, strong anharmonicity, high reproducibility, and relaxation times in excess of 40 us at its flux-insensitive point. Qubit relaxation times 1 T across 22 qubits of widely varying designs are consistently matched with a single model involving resonator loss, ohmic charge noise, and 1/f flux noise, a noise source previously considered primarily in the context of dephasing, with temporal variation in 1 T attributed to quasiparticles. We furthermore demonstrate that qubit dephasing at the flux-insensitive point is dominated by residual thermal photons in the readout resonator. The resulting photon shot noise is mitigated using a dynamical decoupling protocol, resulting in T2 ~ 85 us , approximately the 1 2T limit. In addition to realizing a dramatically improved flux qubit, our results uniquely identify photon shot noise as limiting 2 T in contemporary state-of-art qubits based on transverse qubit-resonator interaction.
READ LESS

Summary

The scalable application of quantum information science will stand on reproducible and controllable high-coherence quantum bits (qubits). In this work, we revisit the design and fabrication of the superconducting flux qubit, achieving a planar device with broad frequency tunability, strong anharmonicity, high reproducibility, and relaxation times in excess of 40...

READ MORE