Publications
Nearfield anechoic chamber and farfield on-site antenna calibration pattern comparison of an S-band planar phased array radar
April 27, 2022
Conference Paper
Published in:
IEEE Annual Conf. on Wireless and Microwave Technology, WAMICON, 27-28 April 2022.
Topic:
R&D area:
R&D group:
Summary
The Advanced Technology Demonstrator (ATD) is an active, S-band, dual-polarization phased array radar developed for weather sensing. The ATD is an active electronically scanned array (AESA) with a 4-m aperture comprised of 4,864 individual transmit/receive (T/R) modules. The antenna was calibrated at the element, subarray, and array levels. Calibration, validation, and verification testing was completed in two main stages, first in an anechoic chamber and second after it was installed on site in its permanent location. This paper describes the procedure used to collect antenna patterns at each stage and compares three key performance metrics: beamwidth, mean-squared sidelobe level (MSSL), and integrated sidelobe level (ISL).
Summary
The Advanced Technology Demonstrator (ATD) is an active, S-band, dual-polarization phased array radar developed for weather sensing. The ATD is an active electronically scanned array (AESA) with a 4-m aperture comprised of 4,864 individual transmit/receive (T/R) modules. The antenna was calibrated at the element, subarray, and array levels. Calibration, validation...
READ MORE
Correlated Bayesian model of aircraft encounters in the terminal area given a straight takeoff or landing
March 12, 2022
Journal Article
Published in:
Aerospace, Vol. 9, No.2, 12 March 2022.
Summary
The integration of new airspace entrants into terminal operations requires design and evaluation of Detect and Avoid systems that prevent loss of well clear from and collision with other aircraft. Prior to standardization or deployment, an analysis of the safety performance of those systems is required. This type of analysis has typically been conducted by Monte Carlo simulation with synthetic, statistically representative encounters between aircraft drawn from an appropriate encounter model. While existing encounter models include terminal airspace classes, none explicitly represents the structure expected while engaged in terminal operations, e.g., aircraft in a traffic pattern. The work described herein is an initial model of such operations where an aircraft landing or taking off via a straight trajectory encounters another aircraft landing or taking off, or transiting by any means. The model shares the Bayesian network foundation of other Massachusetts Institute of Technology Lincoln Laboratory encounter models but tailors those networks to address structured terminal operations, i.e., correlations between trajectories and the airfield and each other. This initial model release is intended to elicit feedback from the standards-writing community.
Summary
The integration of new airspace entrants into terminal operations requires design and evaluation of Detect and Avoid systems that prevent loss of well clear from and collision with other aircraft. Prior to standardization or deployment, an analysis of the safety performance of those systems is required. This type of analysis...
READ MORE
Radar coverage analysis for the Terminal Precipitation on the Glass Program
March 4, 2022
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-450
Summary
The Terminal Precipitation on the Glass (TPoG) program proposes to improve the STARS precipitation depiction by adding an alternative precipitation product based on a national weather-radar-based mosaic, i.e., the NextGen Weather System (aka NextGen Weather Processor [NWP] and Common Support Services Weather [CSS-Wx]). This report describes spatial and temporal domain analyses conducted over the 146 terminal radar approach control (TRACON) airspaces that are within scope of TPoG to identify and quantify future TPoG benefits, as well as potential operational issues.
Summary
The Terminal Precipitation on the Glass (TPoG) program proposes to improve the STARS precipitation depiction by adding an alternative precipitation product based on a national weather-radar-based mosaic, i.e., the NextGen Weather System (aka NextGen Weather Processor [NWP] and Common Support Services Weather [CSS-Wx]). This report describes spatial and temporal domain...
READ MORE
Adapting deep learning models to new meteorological contexts using transfer learning
December 15, 2021
Conference Paper
Published in:
2021 IEEE International Conference on Big Data (Big Data), 2021, pp. 4169-4177, doi: 10.1109/BigData52589.2021.9671451.
Summary
Meteorological applications such as precipitation nowcasting, synthetic radar generation, statistical downscaling and others have benefited from deep learning (DL) approaches, however several challenges remain for widespread adaptation of these complex models in operational systems. One of these challenges is adequate generalizability; deep learning models trained from datasets collected in specific contexts should not be expected to perform as well when applied to different contexts required by large operational systems. One obvious mitigation for this is to collect massive amounts of training data that cover all expected meteorological contexts, however this is not only costly and difficult to manage, but is also not possible in many parts of the globe where certain sensing platforms are sparse. In this paper, we describe an application of transfer learning to perform domain transfer for deep learning models. We demonstrate a transfer learning algorithm called weight superposition to adapt a Convolutional Neural Network trained in a source context to a new target context. Weight superposition is a method for storing multiple models within a single set of parameters thus greatly simplifying model maintenance and training. This approach also addresses the issue of catastrophic forgetting where a model, once adapted to a new context, performs poorly in the original context. We apply weight superposition to the problem of synthetic weather radar generation and show that in scenarios where the target context has less data, a model adapted with weight superposition is better at maintaining performance when compared to simpler methods. Conversely, the simple adapted model performs better on the source context when the source and target contexts have comparable amounts of data.
Summary
Meteorological applications such as precipitation nowcasting, synthetic radar generation, statistical downscaling and others have benefited from deep learning (DL) approaches, however several challenges remain for widespread adaptation of these complex models in operational systems. One of these challenges is adequate generalizability; deep learning models trained from datasets collected in specific...
READ MORE
CoSPA data product description
November 1, 2021
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-449
Summary
This document contains a description of Consolidated Storm Prediction for Aviation (CoSPA) data products that are packaged and distributed for external users. As described in Rappa and Troxel, 2013 [1] for Corridor Integrated Weather System (CIWS) data products, CoSPA products are categorized as gridded and non-gridded. Gridded products are typically expressed as rectangular arrays whose elements contain a data value coinciding with uniformly-spaced observations or computed results on a 2-D surface. Gridded data arrays map to the earth's surface through a map projection, for example, Lambert Conformal or Lambert Azimuthal Equal-Area. CoSPA generates only gridded products; there are no non-gridded data for CoSPA.
Summary
This document contains a description of Consolidated Storm Prediction for Aviation (CoSPA) data products that are packaged and distributed for external users. As described in Rappa and Troxel, 2013 [1] for Corridor Integrated Weather System (CIWS) data products, CoSPA products are categorized as gridded and non-gridded. Gridded products are typically...
READ MORE
Effect of a wet spherical radome on the reflected power for an S-band planar phased array radar antenna
October 24, 2021
Conference Paper
Published in:
2021 Antenna Measurement Techniques Association Symp., AMTA, 24-29 October 2021.
Topic:
R&D area:
R&D group:
Summary
An active S-band dual-polarized multifunction phased array radar (MPAR), the Advanced Technology Demonstrator (ATD), has recently been developed for weather sensing and aircraft surveillance. The ATD is an active electronically scanned array (AESA) with 4864 transmit/receive (T/R) modules and was installed in a spherical radome. Simulations and a novel phased array measurement technique have been explored to assess the impact of high reflectivity from a wet radome during rain that can potentially induce voltages exceeding the transmit amplifier breakdown voltage. The measurement technique uses array elements radiating one at a time to illuminate the radome, and uses superposition to quantify the received signal power in a reference antenna on the face of the array. It is shown that when the radome surface is wet and highly reflective, certain electronic steering angles sum to a large reflected signal focused on the array face. This measurement technique can be used prior to high-power phased array radar operation to monitor the magnitude of reflections and help avoid element transmit amplifier failures.
Summary
An active S-band dual-polarized multifunction phased array radar (MPAR), the Advanced Technology Demonstrator (ATD), has recently been developed for weather sensing and aircraft surveillance. The ATD is an active electronically scanned array (AESA) with 4864 transmit/receive (T/R) modules and was installed in a spherical radome. Simulations and a novel phased...
READ MORE
Benchmarking the processing of aircraft tracks with triples mode and self-scheduling
September 20, 2021
Conference Paper
Published in:
2021 IEEE High Performance Extreme Computing Conf., HPEC, 20-24 September 2021.
Summary
As unmanned aircraft systems (UASs) continue to integrate into the U.S. National Airspace System (NAS), there is a need to quantify the risk of airborne collisions between unmanned and manned aircraft to support regulation and standards development. Developing and certifying collision avoidance systems often rely on the extensive use of Monte Carlo collision risk analysis simulations using probabilistic models of aircraft flight. To train these models, high performance computing resources are required. We've prototyped a high performance computing workflow designed and deployed on the Lincoln Laboratory Supercomputing Center to process billions of observations of aircraft. However, the prototype has various computational and storage bottlenecks that limited rapid or more comprehensive analyses and models. In response, we've developed a novel workflow to take advantage of various job launch and task distribution technologies to improve performance. The workflow was benchmarked using two datasets of observations of aircraft, including a new dataset focused on the environment around aerodromes. Optimizing how the workflow was parallelized drastically reduced the execution time from weeks to days.
Summary
As unmanned aircraft systems (UASs) continue to integrate into the U.S. National Airspace System (NAS), there is a need to quantify the risk of airborne collisions between unmanned and manned aircraft to support regulation and standards development. Developing and certifying collision avoidance systems often rely on the extensive use of...
READ MORE
Benefits of realist ontologies to systems engineering
September 11, 2021
Conference Paper
Published in:
Joint Ontology Workshops 2021 Episode VII: The Bolzano Summer of Knowledge, JOWO 2021, 11-18 September 2021.
Summary
Applied ontologies have been used more and more frequently to enhance systems engineering. In this paper, we argue that adopting principles of ontological realism can increase the benefits that ontologies have already been shown to provide to the systems engineering process. Moreover, adopting Basic Formal Ontology (BFO), an ISO standard for top-level ontologies from which more domain specific ontologies are constructed, can lead to benefits in four distinct areas of systems engineering: (1) interoperability, (2) standardization, (3) testing, and (4) data exploitation. Reaping these benefits in a model-based systems engineering (MBSE) context requires utilizing an ontology's vocabulary when modeling systems and entities within those systems. If the chosen ontology abides by the principles of ontological realism, a semantic standard capable of uniting distinct domains, using BFO as a hub, can be leveraged to promote greater interoperability among systems. As interoperability and standardization increase, so does the ability to collect data during the testing and implementation of systems. These data can then be reasoned over by computational reasoners using the logical axioms within the ontology. This, in turn, generates new data that would have been impossible or too inefficient to generate without the aid of computational reasoners.
Summary
Applied ontologies have been used more and more frequently to enhance systems engineering. In this paper, we argue that adopting principles of ontological realism can increase the benefits that ontologies have already been shown to provide to the systems engineering process. Moreover, adopting Basic Formal Ontology (BFO), an ISO standard...
READ MORE
Demand and capacity modeling for advanced air mobility
August 2, 2021
Conference Paper
Published in:
AIAA Aviation 2021 Conf., 2-6 August 2021.
Topic:
R&D area:
R&D group:
Summary
Advanced Air Mobility encompasses emerging aviation technologies that transport people and cargo between local, regional, or urban locations that are currently underserved by aviation and other transportation modalities. The disruptive nature of these technologies has pushed industry, academia, and governments to devote significant investments to understand their impact on airspace risk, operational procedures, and passengers. A flexible framework was designed to assess the operational viability of these technologies and the sensitivity to a variety of assumptions. This framework is used to simulate air taxi traffic within New York City by replacing a portion of the city's taxi requests with trips taken with electric vertical takeoff and landing vehicles and evaluate the sensitivity of passenger trip time to a variety of system wide assumptions. In particular, the paper focuses on the impact of the passenger capacity, landing site vehicle capacity, and fleet size. The operation density is then compared with the current air traffic to assess operation constraints that will challenge the network UAM operations.
Summary
Advanced Air Mobility encompasses emerging aviation technologies that transport people and cargo between local, regional, or urban locations that are currently underserved by aviation and other transportation modalities. The disruptive nature of these technologies has pushed industry, academia, and governments to devote significant investments to understand their impact on airspace...
READ MORE
Applicability and surrogacy of uncorrelated airspace encounter models at low altitudes
July 1, 2021
Journal Article
Published in:
J. Air Transport., Vol. 29, No. 3, July-September 2021, pp. 137-41.
Summary
National Airspace System (NAS) is a complex and evolving system that enables safe and efficient aviation. Advanced air mobility concepts and new airspace entrants, such as unmanned aircraft, must integrate into the NAS without degrading overall safety or efficiency. For instance, regulations, standards, and systems are required to mitigate the risk of a midair collision between aircraft. Monte Carlo simulations have been a foundational capability for decades to develop, assess, and certify aircraft conflict avoidance systems. These are often validated through human-in-the-loop experiments and flight testing. For example, an update to the Traffic Collision Avoidance System (TCAS) mandated for manned aircraft was validated in part using this approach [1]. For many aviation safety studies, manned aircraft behavior is represented using the MIT Lincoln Laboratory statistical encounter models [2–5]. The original models [2–4] were developed from 2008 to 2013 to support safety simulations for altitudes above 500 feet above ground level (AGL). However, these models were not sufficient to assess the safety of smaller unmanned aerial systems (UAS) operations below 500 feet AGL and fully support the ASTM F38 and RTCA SC-147 standards efforts. In response, newer models [5–7] with altitude floors below 500 feet AGL have been in development since 2018. Many of the models assume that aircraft behavior is uncorrelated and not dependent on air traffic services or nearby aircraft. The models were trained using observations of cooperative aircraft equipped with transponders, but data sources and assumptions vary. The newer models are organized by aircraft types of fixed-wing multi-engine, fixed-wing single engine, and rotorcraft, whereas the original models do not consider aircraft type. Our research objective was to compare the various uncorrelated models of conventional aircraft and identify how the models differ. Particularly if models of rotorcraft were sufficiently different from models of fixed-wing aircraft to require type-specific models. The scope of this work was limited to altitudes below 5000 feet AGL, the expected altitude ceiling for many new airspace entrants. The scope was also informed by the Federal Aviation Administration (FAA) UAS Integration Office and Alliance for System Safety of UAS through Research Excellence (ASSURE). The primary contribution is guidance on which uncorrelated models to leverage when evaluating the performance of a collision avoidance system designed for low-altitude operations, such as prescribed by the ASTM F3442 detect and avoid standard for smaller UAS [8]. We also address which models can be surrogates for non-cooperative aircraft without transponders. All models and software used are publicly available under open source licenses [9].
Summary
National Airspace System (NAS) is a complex and evolving system that enables safe and efficient aviation. Advanced air mobility concepts and new airspace entrants, such as unmanned aircraft, must integrate into the NAS without degrading overall safety or efficiency. For instance, regulations, standards, and systems are required to mitigate the...
READ MORE