Publications

Refine Results

(Filters Applied) Clear All

Development and application of spherically curved charge-coupled device imagers

Summary

Operation of a CCD imager on a curved focal surface offers advantages to flat focal planes, especially for lightweight, relatively simple optical systems. The first advantage is that the modulation transfer function can approach diffraction-limited performance for a spherical focal surface employed in large field-of-view or large-format imagers. The second advantage is that a curved focal surface maintains more uniform illumination as a function of radius from the field center. Examples of applications of curved imagers, described here, include a small compact imager and the large curved array used in the Space Surveillance Telescope. The operational characteristics and mechanical limits of an imager deformed to a 15 mm radius are also described.
READ LESS

Summary

Operation of a CCD imager on a curved focal surface offers advantages to flat focal planes, especially for lightweight, relatively simple optical systems. The first advantage is that the modulation transfer function can approach diffraction-limited performance for a spherical focal surface employed in large field-of-view or large-format imagers. The second...

READ MORE

Hyperspectral Microwave Atmospheric Sounder (HyMAS) - new capability in the CoSMIR/CoSSIR scanhead

Published in:
2015 IEEE Aerospace Conf., 7-14 March 2015.

Summary

MIT Lincoln Laboratory and NASA's Goddard Space Flight Center have teamed to adapt an existing instrument platform, the CoSMIR/CoSSIR system for atmospheric sensing, to develop and demonstrate a new capability in a hyperspectral microwave atmospheric sounder (HyMAS). This new sensor comprises a highly innovative intermediate frequency processor (IFP), that provides the filtering and digitization of 52 radiometric channels and the interoperable remote component (IRC) adapted to CoSMIR, CoSSIR, and HyMAS that stores and archives the data with time tagged calibration and navigation data. The first element of the work is the demonstration of a hyperspectral microwave receiver subsystem that was recently shown using a comprehensive simulation study to yield performance that substantially exceeds current state-of-the-art. Hyperspectral microwave sounders with ~100 channels offer temperature and humidity sounding improvements similar to those obtained when infrared sensors became hyperspectral. Hyperspectral microwave operation is achieved using independent RF antenna/receiver arrays that sample the same area/volume of the Earth's surface/atmosphere at slightly different frequencies and therefore synthesize a set of dense, finely spaced vertical weighting functions. The second, enabling element is the development of a compact 52-channel Intermediate Frequency processor module. A principal challenge of a hyperspectral microwave system is the size of the IF filter bank required for channelization. Large bandwidths are simultaneously processed, thus complicating the use of digital back-ends with associated high complexities, costs, and power requirements. Our approach involves passive filters implemented using low-temperature co-fired ceramic (LTCC) technology to achieve an ultra-compact module that can be easily integrated with existing RF front-end technology. This IF processor is applicable to other microwave sensing missions requiring compact IF spectrometry. The unit produces 52 channels of spectral data in a highly compact volume (
READ LESS

Summary

MIT Lincoln Laboratory and NASA's Goddard Space Flight Center have teamed to adapt an existing instrument platform, the CoSMIR/CoSSIR system for atmospheric sensing, to develop and demonstrate a new capability in a hyperspectral microwave atmospheric sounder (HyMAS). This new sensor comprises a highly innovative intermediate frequency processor (IFP), that provides...

READ MORE

Detecting small asteroids with the Space Surveillance Telescope

Summary

The ability of the Space Surveillance Telescope (SST) to find small (2-15 m diameter) NEAs suitable for the NASA asteroid retrieval mission is investigated. Orbits from a simulated population of targetable small asteroids were propagated and observations with the SST were simulated. Different search patterns and telescope time allocation cases were considered, as well as losses due to FOV gaps and weather. It is concluded that a full-time, dedicated survey at the SST is likely necessary to find a useful population of these NEAs within the mission launch timeframe, especially if an object must be observed on >1 night at SST to qualify as a detection. The simulations were also performed for an identical telescope in the southern hemisphere, which is found to produce results very similar to the SST in New Mexico due to significant (~80%) overlap in the population of objects detected at each site. In addition to considering the SST's ability to detect small NEAs, a parallel study was performed focusing on >100 m diameter objects. This work shows that even with limited telescope time (3 nights per month) a substantial number of these larger objects would be detected.
READ LESS

Summary

The ability of the Space Surveillance Telescope (SST) to find small (2-15 m diameter) NEAs suitable for the NASA asteroid retrieval mission is investigated. Orbits from a simulated population of targetable small asteroids were propagated and observations with the SST were simulated. Different search patterns and telescope time allocation cases...

READ MORE

Smart pixel imaging with computational-imaging arrays

Published in:
SPIE, Vol. 9070, Infrared Technology and Applications XL, 5 May 2014, 90703D.

Summary

Smart pixel imaging with computational-imaging arrays (SPICA) transfers image plane coding typically realized in the optical architecture to the digital domain of the focal plan array, thereby minimizing signal-to-noise losses associated with static filters or apertures and inherent diffraction concerns. MIT Lincoln Laboratory has been developing digital-pixel focal plane array (DFPA) devices for many years. In this work, we leverage legacy designs modified with new features to realize a computational imaging array (CIA) with advanced pixel-processing capabilities. We briefly review the use of DFPAs for on-chip background removal and image plane filtering. We focus on two digital readout integrated circuits (DROICS) as CIAs for two-dimensional (2D) transient target tracking and three-dimensional (3) transient target estimation using per-pixel coded-apertures or flutter shutters. This paper describes two DROICs -- a SWIR pixel-processing imager (SWIR-PPI) and a Visible CIA (VISCIA). SWIR-PPI is a DROIC with a 1 kHz global frame rate with a maximum per-pixel shuttering rate of 100 MHz, such that each pixel can be modulated by a time-varying, pseudo-random, and duo-binary signal (+1,-1,0). Combining per-pixel time-domain coding and processing enables 3D (x,y,T) target estimation with limited loss of spatial resolution. We evaluate structured and pseudo-random encoding strategies and employ linear inversion and non-linear inversion using total-variation minimization to estimate a 3D data cube from a single 2D temporally-encoded measurement. The VISCIA DROIC, while low-resolution, has a 6 kHz global frame rate and simultaneously encodes eight periodic or aperiodic transient target signatures at a maximum rate of 50 MHz using eight 8-bit counters. By transferring pixel-based image plane coding to the DROIC and utilizing sophisticated processing, our CIAs enable on-chip temporal super-resolution.
READ LESS

Summary

Smart pixel imaging with computational-imaging arrays (SPICA) transfers image plane coding typically realized in the optical architecture to the digital domain of the focal plan array, thereby minimizing signal-to-noise losses associated with static filters or apertures and inherent diffraction concerns. MIT Lincoln Laboratory has been developing digital-pixel focal plane array...

READ MORE

Simultaneous dynamic pupil coding with on-chip coded aperture temporal imaging

Published in:
SRS 2014: Signal Recovery and Synthesis Conf., 13-17 June 2014.

Summary

We describe a new sensor that combines dynamic pupil coding with a digital readout integrated circuit (DROIC) capable of modulating a scene with a global or per-pixel time-varying, pseudo-random, and duo-binary signal (+1-1,0).
READ LESS

Summary

We describe a new sensor that combines dynamic pupil coding with a digital readout integrated circuit (DROIC) capable of modulating a scene with a global or per-pixel time-varying, pseudo-random, and duo-binary signal (+1-1,0).

READ MORE

Digital pixel CMOS focal plane array with on-chip multiply accumulate units for low-latency image processing

Published in:
SPIE, Vol. 9070, Infrared Technology and Applications XL, 5 May 2014, 90703B.

Summary

A digital pixel CMOS focal plane array has been developed to enable low latency implementations of image processing systems such as centroid trackers, Shack-Hartman wavefront sensors, and Fitts correlation trackers through the use of in-pixel digital signal processing (DSP) and generic parallel pipelined multiply accumulate (MAC) units. Light intensity digitization occurs at the pixel level, enabling in-pixel DSP and noiseless data transfer from the pixel array to the peripheral processing units. The pipelined processing of row and column image data prior to off chip readout reduces the required output bandwidth of the image sensor, thus reducing the latency of computations necessary to implement various image processing systems. Data volume reductions of over 80% lead to sub 10us latency for completing various tracking and sensor algorithms. This paper details the architecture of the pixel-processing imager (PPI) and presents some initial results from a prototype device fabricated in a standard 65nm CMOS process hybridized to a commercial off-the-shelf short-wave infrared (SWIR) detector array.
READ LESS

Summary

A digital pixel CMOS focal plane array has been developed to enable low latency implementations of image processing systems such as centroid trackers, Shack-Hartman wavefront sensors, and Fitts correlation trackers through the use of in-pixel digital signal processing (DSP) and generic parallel pipelined multiply accumulate (MAC) units. Light intensity digitization...

READ MORE

Geospatial analysis based on GIS integrated with LADAR

Summary

In this work, we describe multi-layered analyses of a high-resolution broad-area LADAR data set in support of expeditionary activities. High-level features are extracted from the LADAR data, such as the presence and location of buildings and cars, and then these features are used to populate a GIS (geographic information system) tool. We also apply line-of-sight (LOS) analysis to develop a path-planning module. Finally, visualization is addressed and enhanced with a gesture-based control system that allows the user to navigate through the enhanced data set in a virtual immersive experience. This work has operational applications including military, security, disaster relief, and task-based robotic path planning.
READ LESS

Summary

In this work, we describe multi-layered analyses of a high-resolution broad-area LADAR data set in support of expeditionary activities. High-level features are extracted from the LADAR data, such as the presence and location of buildings and cars, and then these features are used to populate a GIS (geographic information system)...

READ MORE

Pixel-processing imager development for directed energy applications

Summary

Tactical high-energy laser (HEL) systems face a range of imaging-related challenges in wavefront sensing, acquiring and tracking targets, selecting the HEL aimpoint, and assessing lethality. Accomplishing these functions in a timely fashion may be limited by competing requirements on total field of regard, target resolution, signal to noise, and focal plane readout bandwidth. In this paper, we explore the applicability of an emerging pixel-processing imager (PPI) technology to these challenges. The on-focal-plane signal processing capabilities of the MIT Lincoln Laboratory PPI technology have recently been extended in support of directed energy applications. We describe this work as well as early results from a new PPI-based short-wave-infrared focal plane readout capable of supporting diverse applications such as low-latency Shack-Hartmann wavefront sensing, centroid computation, and Fitts correlation tracking.
READ LESS

Summary

Tactical high-energy laser (HEL) systems face a range of imaging-related challenges in wavefront sensing, acquiring and tracking targets, selecting the HEL aimpoint, and assessing lethality. Accomplishing these functions in a timely fashion may be limited by competing requirements on total field of regard, target resolution, signal to noise, and focal...

READ MORE

Nanosatellites for Earth environmental monitoring: the MicroMAS project

Summary

The Micro-sized Microwave Atmospheric Satellite (MicroMAS) is a 3U cubesat (34x10x10 cm, 4.5 kg) hosting a passive microwave spectrometer operating near the 118.75-GHz oxygen absorption line. The focus of the first MicroMAS mission (hereafter, MicroMAS-1) is to observe convective thunderstorms, tropical cyclones, and hurricanes from a near-equatorial orbit at approximately 500-km altitude. A MicroMAS flight unit is currently being developed in anticipation of a 2014 launch. A parabolic reflector is mechanically rotated as the spacecraft orbits the earth, thus directing a cross-track scanned beam with FWHM beamwidth of 2.4-degrees, yielding an approximately 20-km diameter footprint at nadir incidence from a nominal altitude of 500 km. Radiometric calibration is carried out using observations of cold space, the earth?s limb, and an internal noise diode that is weakly coupled through the RF front-end electronics. A key technology feature is the development of an ultra-compact intermediate frequency processor module for channelization, detection, and A-to-D conversion. The antenna system and RF front-end electronics are highly integrated and miniaturized. A MicroMAS-2 mission is currently being planned using a multiband spectrometer operating near 118 and 183 GHz in a sunsynchronous orbit of approximately 800-km altitude. A HyMAS- 1 (Hyperspectral Microwave Atmospheric Satellite) mission with approximately 50 channels near 118 and 183 GHz is also being planned. In this paper, the mission concept of operations will be discussed, the radiometer payload will be described, and the spacecraft subsystems (avionics, power, communications, attitude determination and control, and mechanical structures) will be summarized.
READ LESS

Summary

The Micro-sized Microwave Atmospheric Satellite (MicroMAS) is a 3U cubesat (34x10x10 cm, 4.5 kg) hosting a passive microwave spectrometer operating near the 118.75-GHz oxygen absorption line. The focus of the first MicroMAS mission (hereafter, MicroMAS-1) is to observe convective thunderstorms, tropical cyclones, and hurricanes from a near-equatorial orbit at approximately...

READ MORE

Design and analysis of a hyperspectral microwave receiver subsystem

Published in:
MICRORAD 2012, 12th Specialist Meeting on Microwave Radiometry and Remote Sensing of the Environment, 5-9 March 2012.

Summary

Recent technology advances have profoundly changed the landscape of modern radiometry by enabling miniaturized, low-power, and low-noise radio-frequency receivers operating at frequencies near 200 GHz and beyond. These advances enable the practical use of receiver arrays to multiplex multiple broad frequency bands into many spectral channels. We use the term "hyperspectral microwave" to refer generically to microwave sounding systems with approximately 50 spectral channels or more. In this paper, we report on the design and analysis of the receiver subsystem (lensed antenna, RF frontend electronics, and IF processor module) for the Hyperspectral Microwave Atmospheric Sounder (HyMAS) comprising multiple receivers near the oxygen absorption line at 118.75 GHz and the water vapor absorption line at 183.31 GHz. The hyperspectral microwave receiver system will be integrated into a new scanhead compatible with the NASA GSFC Conical Scanning Microwave Imaging Radiometer/Compact Submillimeter-wave Imaging Radiometer (CoSMIR/CoSSIR) airborne instrument system to facilitate demonstration and performance characterization under funding from the NASA ESTO Advanced Component Technology program. Four identical radiometers will be used to cover 108-119 GHz, and two identical receivers will be used to cover 173-183 GHz. Subharmonic mixers will be driven by frequency-multiplied dielectric resonant oscillators, and single-sideband operation will be achieved by waveguide filtering of the lower sideband. A relatively high IF frequency is chosen to facilitate miniaturization of the IF processor module, which will be fabricated using Low Temperature Co-fired Ceramic (LTCC) technology. Corrugated feed antennas with lenses are used to achieve a FWHM beamwidth of approximately 3.5 degrees. Two polarizations are measured by each feed to increase overall channel count, and multiple options will be considered during the design phase for the polarization diplexing approach. Broadband operation over a relatively high intermediate frequency range (18-29 GHz) is a technical challenge of the front-end receiver systems, and a receiver temperature of approximately 2000-3000K is expected over the receiver bandwidth. This performance, together with approximately l00-msec integration times typical of airborne operation, yields channel NEDTs of approximately 0.35K, which is adequate to demonstrate the hyperspectral microwave concept by comparing profile retrievals with high-fidelity ground truth available either by coincident overpasses of hyperspectral infrared sounders and/or in situ radiosonde/dropsonde measurements.
READ LESS

Summary

Recent technology advances have profoundly changed the landscape of modern radiometry by enabling miniaturized, low-power, and low-noise radio-frequency receivers operating at frequencies near 200 GHz and beyond. These advances enable the practical use of receiver arrays to multiplex multiple broad frequency bands into many spectral channels. We use the term...

READ MORE