Publications

Refine Results

(Filters Applied) Clear All

Photonic lantern kW-class fiber amplifier

Published in:
Opt. Express, Vol. 25, No. 22, 30 October 2017, pp. 27543-27550.

Summary

Pump-limited kW-class operation in a multimode fiber amplifier using adaptive mode control and a photonic lantern front end was achieved. An array of three single-mode fiber inputs was used to adaptively inject the appropriate superposition of input modes in a three-mode gain fiber to achieve the desired mode at the output. Mode fluctuations at high power were compensated by adjusting the relative phase, amplitude, and polarization of the single-mode fiber inputs. The outlook for further power scaling and adaptive-optic compensation is described.
READ LESS

Summary

Pump-limited kW-class operation in a multimode fiber amplifier using adaptive mode control and a photonic lantern front end was achieved. An array of three single-mode fiber inputs was used to adaptively inject the appropriate superposition of input modes in a three-mode gain fiber to achieve the desired mode at the...

READ MORE

Photonic lantern adaptive spatial mode control in LMA fiber amplifiers

Published in:
Opt. Express, Vol. 24, No. 4, 22 February 2016, pp. 3405-13.

Summary

We demonstrate adaptive-spatial mode control (ASMC) in few-moded double-clad large mode area (LMA) fiber amplifiers by using an all-fiber-based photonic lantern. Three single-mode fiber inputs are used to adaptively inject the appropriate superposition of input modes in a multimode gain fiber to achieve the desired mode at the output. By actively adjusting the relative phase of the single-mode inputs, near-unity coherent combination resulting in a single fundamental mode at the output is achieved.
READ LESS

Summary

We demonstrate adaptive-spatial mode control (ASMC) in few-moded double-clad large mode area (LMA) fiber amplifiers by using an all-fiber-based photonic lantern. Three single-mode fiber inputs are used to adaptively inject the appropriate superposition of input modes in a multimode gain fiber to achieve the desired mode at the output. By...

READ MORE

Sub-picosecond pulses at 100 W average power from a Yb:YLF chirped-pulse amplification system

Published in:
Opt. Lett., Vol. 37, No. 13, 1 July 2012, pp. 2700-2702.

Summary

We present a high-repetition-frequency, diode-pumped, and chirped-pulse amplification system operating at 106 W average output with excellent beam quality (M^2 = 1.3), based on cryogenically cooled Yb:YLF. 1 nJ seed pulses, derived from a mode-locked Ti:sapphire laser, are first amplified to 1 mJ pulse energy at 10 kHz repetition frequency in a regenerative amplifier. The second-stage, multipass amplifier increases the pulse energy to 10.6 mJ, resulting in a spectral width of 2.2 nm. The pulses are compressed to 865 fs in duration, which is 1.26 times the transform limit.
READ LESS

Summary

We present a high-repetition-frequency, diode-pumped, and chirped-pulse amplification system operating at 106 W average output with excellent beam quality (M^2 = 1.3), based on cryogenically cooled Yb:YLF. 1 nJ seed pulses, derived from a mode-locked Ti:sapphire laser, are first amplified to 1 mJ pulse energy at 10 kHz repetition frequency...

READ MORE

Diffractive beam combining of a 2.5-kW fiber laser array

Published in:
ASSP 2012, Advanced Solid-State Photonics, 29 January - 1 February 2012.

Summary

Five 500-W fiber amplifiers were coherently combined with 79% efficiency using a diffractive optical element (DOE) combiner, generating a single beam whose M^2 = 1.1 beam quality exceeded that of the inputs.
READ LESS

Summary

Five 500-W fiber amplifiers were coherently combined with 79% efficiency using a diffractive optical element (DOE) combiner, generating a single beam whose M^2 = 1.1 beam quality exceeded that of the inputs.

READ MORE

High-power, low-noise 1.5-um slab-coupled optical waveguide (SCOW) emitters: physics, devices, and applications

Summary

We review the development of a new class of high-power, edge-emitting, semiconductor optical gain medium based on the slab-coupled optical waveguide (SCOW) concept. We restrict the scope to InP-based devices incorporating either InGaAsP or InGaAlAs quantum-well active regions and operating in the 1.5-μm-wavelength region. Key properties of the SCOW gain medium include large transverse optical mode dimensions (>;5 × 5 μm), ultralow optical confinement factor (Γ ~ 0.25-1%), and small internal loss coefficient (α i ~ 0.5 cm-1). These properties have enabled the realization of 1) packaged Watt-class semiconductor optical amplifiers (SOAs) having low-noise figure (4-5 dB), 2) monolithic passively mode-locked lasers generating 0.25-W average output power, 3) external-cavity fiber-ring actively mode-locked lasers exhibiting residual timing jitter of
READ LESS

Summary

We review the development of a new class of high-power, edge-emitting, semiconductor optical gain medium based on the slab-coupled optical waveguide (SCOW) concept. We restrict the scope to InP-based devices incorporating either InGaAsP or InGaAlAs quantum-well active regions and operating in the 1.5-μm-wavelength region. Key properties of the SCOW gain...

READ MORE

Cryogenic Yb3+ -doped materials for pulsed solid-state laser applications

Published in:
Opt. Mat. Expr., Vol. 1, No. 3, 1 July 2011, pp. 434-450.

Summary

We review recent progress in pulsed lasers using cryogenically-cooled Yb3+ -doped gain media, with an emphasis on high average power. Recent measurements of thermo-optic properties for various host material at both room and cryogenic temperature are presented, including themral conductivity, coefficient of thermal expansion and refractive index. Host materials reviewed include Y2O3, Lu2O3, Sc2O3, YLF, YSO, GSAG, and YVO4. We report on performance of several cryogenic Yb lasers operating at 5-kHz pulse repetition frequency (PRF) a Q-switched Yb:YAG laser is shwon to operate at 114-W average power, with 16-ns pulse duration. A chirped pulse amplifier achieves 115-W output using a composite Yb:YAG/Yb:GSAG amplifier, with pulses that compress to 1.6 ps. Finally, a high-average-power femtosecond laser based on Yb:YLF is discussed, with results for a 10-W regenerative amplifier at 10-kHZ PRF.
READ LESS

Summary

We review recent progress in pulsed lasers using cryogenically-cooled Yb3+ -doped gain media, with an emphasis on high average power. Recent measurements of thermo-optic properties for various host material at both room and cryogenic temperature are presented, including themral conductivity, coefficient of thermal expansion and refractive index. Host materials reviewed...

READ MORE

Cryogenic YB3+-doped solid-state lasers

Published in:
IEEE J. Sel. Topics in Quantum Electron., Vol. 13, No. 3, May/June 2007, pp. 448-459.

Summary

Cryogenically cooled solid-state lasers promise a revolution in power scalability while maintaining a good beam quality because of significant improvements in efficiency and thermo-optic properties. This is particularly true forYb3+ lasers because of their relatively lowquantum defect and relatively broadband absorption even at cryogenic temperatures. Thermo-optic properties of host materials, including thermal conductivity, thermal expansion, and refractive index at low temperature, are reviewed and data presented for YAG (ceramic and single crystal), GGG, GdVO4, and Y2O3. Spectroscopic properties of Yb:YAG and Yb:LiYF4 (YLF) including absorption cross sections, emission cross sections, and fluorescence lifetimes at cryogenic temperatures are characterized. Recent experiments have pushed the power from an end-pumped cryogenically cooled Yb:YAG laser to 455-W continuous-wave output power from 640-W incident pump power at anM2 of 1.4.
READ LESS

Summary

Cryogenically cooled solid-state lasers promise a revolution in power scalability while maintaining a good beam quality because of significant improvements in efficiency and thermo-optic properties. This is particularly true forYb3+ lasers because of their relatively lowquantum defect and relatively broadband absorption even at cryogenic temperatures. Thermo-optic properties of host materials...

READ MORE

250 mW, 1.5 um monolithic passively mode-locked slab-coupled optical waveguide laser

Published in:
Opt. Lett., Vol. 31, No. 2, January 15, 2006, pp. 223-225.

Summary

We report the demonstration of a 1.5 um InGaAsP mode-locked slab-coupled optical waveguide laser (SCOWL) producing 10 ps pulses with energies of 58 pJ and average output powers of 250 mW at a repetition rate of 4.29 GHz. To the best of our knowledge, this is the first passively mode-locked slab-coupled optical waveguide laser. The large mode and low confinement factor of the SCOWL architecture allows the realization of monolithic mode-locked lasers with high output power and pulse energy. The laser output is nearly diffraction limited with M2 values less than 1.2 in both directions.
READ LESS

Summary

We report the demonstration of a 1.5 um InGaAsP mode-locked slab-coupled optical waveguide laser (SCOWL) producing 10 ps pulses with energies of 58 pJ and average output powers of 250 mW at a repetition rate of 4.29 GHz. To the best of our knowledge, this is the first passively mode-locked...

READ MORE

Showing Results

1-8 of 8