Publications
Summary of the EO-1 ALI performance during the first 2.5 years on-orbit
August 3, 2003
Conference Paper
Published in:
SPIE Vol. 5151, Earth Observing Systems VIII, 3-8 August 2003, pp. 574-585.
Topic:
R&D area:
Summary
The Advanced Land Imager (ALI) is a VNIR/SWIR, pushbroom instrument that is flying aboard the Earth Observing-1 (EO-1) spacecraft. Launched on November 21, 2000, the objective of the ALI is to flight validate emerging technologies that can be infused into future land imaging sensors. During the first two and one-half years on-orbit, the performance of the ALI has been evaluated using on-board calibrators and vicarious observations. The results of this evaluation are presented here. The spatial performance of the instrument, derived using stellar, lunar, and bridge observations, is summarized. The radiometric stability of the focal plane and telescope, established using solar, lunar, ground truth, and on-board sources, is also provided.
Summary
The Advanced Land Imager (ALI) is a VNIR/SWIR, pushbroom instrument that is flying aboard the Earth Observing-1 (EO-1) spacecraft. Launched on November 21, 2000, the objective of the ALI is to flight validate emerging technologies that can be infused into future land imaging sensors. During the first two and one-half...
READ MORE
Overview of the Earth Observing One (EO-1) mission
June 1, 2003
Journal Article
Published in:
IEEE Trans. Geosci. Remote Sens., Vol. 41, No. 6, Pt. 1, June 2003, pp. 1149-1159.
Summary
The Earth Observing One (EO-1) satellite, a part of National Aeronautics and Space Administration's New Millennium Program, was developed to demonstrate new technologies and strategies for improved earth observations. It was launched from Vandenburg Air Force Base on November 21, 2000. The EO-1 satellite contains three observing instruments supported by a variety of newly developed space technologies. The Advanced Land Imager (ALI) is a prototype for a new generation of Landsat-7 Thematic Mapper. The Hyperion Imaging Spectrometer is the first high spatial resolution imaging spectrometer to orbit the earth. The Linear Etalon Imaging Spectral Array (LEISA) Atmospheric Corrector (LAC) is a high spectral resolution wedge imaging spectrometer designed to measure atmospheric water vapor content. Instrument performances are validated and carefully monitored through a combination of radiometric calibration approaches: solar, lunar, stellar, earth (vicarious), and atmospheric observations complemented by onboard calibration lamps and extensive prelaunch calibration. Techniques for spectral calibration of space-based sensors have been tested and validated with Hyperion. ALI and Hyperion instrument performance continue to meet or exceed predictions well beyond the planned one-year program. This paper reviews the EO-1 satellite system and provides details of the instruments and their performance as measured during the first year of operation. Calibration techniques and tradeoffs between alternative approaches are discussed. An overview of the science applications for instrument performance assessment is presented.
Summary
The Earth Observing One (EO-1) satellite, a part of National Aeronautics and Space Administration's New Millennium Program, was developed to demonstrate new technologies and strategies for improved earth observations. It was launched from Vandenburg Air Force Base on November 21, 2000. The EO-1 satellite contains three observing instruments supported by...
READ MORE
Flight test results of the Earth Observing-1 Advanced Land Imager
July 7, 2002
Conference Paper
Published in:
SPIE, Vol. 4814, Earth Observing Systems VII, 7-10 July 2002, pp. 296-305.
Summary
The Advanced Land Imager (ALI) is the primary instrument on the Earth Observing-1 spacecraft (EO-1) and was developed under NASA's New Millennium Program (NMP). The NMP mission objective is to flight-validate advanced technologies that will enable dramatic improvements in performance, cost, mass, and schedule for future, Landsat-like, Earth Science Enterprise instruments. ALI contains a number of innovative features designed to achieve this objective. These include the basic instrument architecture, which employs a push-broom data collection mode, a wide field-of-view optical design, compact multi-spectral detector arrays, non-cryogenic HgCdTe for the short wave infrared bands, silicon carbide optics, and a multi-level solar calibration technique. The sensor includes detector arrays that operate in ten bands, one panchromatic, six VNIR and three SWIR, spanning the range fiom 0.433 to 2.35 um. Launched on November 21, 2000, ALI instrument performance was monitored during its first year on orbit using data collected during solar, lunar, stellar, and earth observations. This paper will provide an overview of EO-1 mission activities during this period. Additionally, the on-orbit spatial and radiometric performance of the instrument will be compared to pre-flight measurements and the temporal stability of ALI will be presented.
Summary
The Advanced Land Imager (ALI) is the primary instrument on the Earth Observing-1 spacecraft (EO-1) and was developed under NASA's New Millennium Program (NMP). The NMP mission objective is to flight-validate advanced technologies that will enable dramatic improvements in performance, cost, mass, and schedule for future, Landsat-like, Earth Science Enterprise...
READ MORE
Initial flight test results from the EO-1 Advanced Land Imager: radiometric performance
July 9, 2001
Conference Paper
Published in:
IGARSS 2001, Int. Geoscience and Remote Sensing Symp., Vol. 1, 9-13 July 2001, pp. 515-417.
Topic:
R&D area:
Summary
The Advanced Land Imager (ALI) is one of three instruments flown on the first Earth Observing mission (EO-1) under NASA's New Millennium Program (NMP). The primary NMP mission objective is to flight-validate advanced technologies that will enable dramatic improvements in performance, cost, mass and schedule for future, Landsat-like, earth remote sensing instruments. ALI contains a number of innovative features, including all the Category 1 technology demonstrations of the EO-1 mission. These include the basic instrument architecture which employs a push-broom data collection mode, a wide field of view optical design, compact multispectral detector arrays, non-cryogenic HgCdTe for the short wave infrared bands, silicon carbide optics and a multi-level solar calibration technique. The Earth Observing-1 spacecraft was successfully launched on November 21, 2000. During the first sixty days on orbit, several Earth scenes were collected and on-orbit calibration techniques were exercised by the Advanced Land Imager. This paper presents the status of ALI radiometric performance characterization obtained from the data collected during that period.
Summary
The Advanced Land Imager (ALI) is one of three instruments flown on the first Earth Observing mission (EO-1) under NASA's New Millennium Program (NMP). The primary NMP mission objective is to flight-validate advanced technologies that will enable dramatic improvements in performance, cost, mass and schedule for future, Landsat-like, earth remote...
READ MORE
Architectural trades for an advanced geostationary atmospheric sounding instrument
March 10, 2001
Conference Paper
Published in:
2001 IEEE Aerospace Conf. Proc., Vol. 4, 10-17 March 2001, pp. 4-1693 - 4-1711.
Topic:
R&D area:
Summary
The process of formulating a remote sensing instrument design from a set of observational requirements involves a series of trade studies during which judgments are made between available design options. The outcome of this process is a system architecture which drives the size, weight, power consumption, cost, and technological risk of the instrument. In this paper, a set of trade studies are described which guided the development of a baseline sensor design to provide vertical profiles (soundings) of atmospheric temperature and humidity from future Geostationary Operational Environmental Satellite (GOES) platforms. Detailed trade studies presented include the choice between an interferometric versus a dispersive spectrometer, the optical design of the IR interferometer and visible imaging channel, the optimization of the instrument spatial response, the selection of detector array materials, operating temperatures, and array size, the thermal design for detector and optics cooling, and the electronics required to process detected interferograms into spectral radiance. The trade study process was validated through simulations of the radiometric performance of the instrument, and through simulated retrievals of vertical profiles of atmospheric temperature and humidity. The flexibility of these system trades is emphasized, highlighting the differing outcomes that occur from this process as system requirements evolve. Observations are made with respect to the reliability and readiness of key technologies. The results of this study were disseminated to industry to assist their interpretation of, and responses to, system requirements provided by the U.S. Government.
Summary
The process of formulating a remote sensing instrument design from a set of observational requirements involves a series of trade studies during which judgments are made between available design options. The outcome of this process is a system architecture which drives the size, weight, power consumption, cost, and technological risk...
READ MORE