Publications

Refine Results

(Filters Applied) Clear All

Operation of an optical atomic clock with a Brillouin laser subsystem

Summary

Microwave atomic clocks have traditionally served as the 'gold standard' for precision measurements of time and frequency. However, over the past decade, optical atomic clocks have surpassed the precision of their microwave counterparts by two orders of magnitude or more. Extant optical clocks occupy volumes of more than one cubic metre, and it is a substantial challenge to enable these clocks to operate in field environments, which requires the ruggedization and miniaturization of the atomic reference and clock laser along with their supporting lasers and electronics. In terms of the clock laser, prior laboratory demonstrations of optical clocks have relied on the exceptional performance gained through stabilization using bulk cavities, which unfortunately necessitates the use of vacuum and also renders the laser susceptible to vibration-induced noise. Here, using a stimulated Brillouin scattering laser subsystem that has a reduced cavity volume and operates without vacuum, we demonstrate a promising component of a portable optical atomic clock architecture. We interrogate a 88Sr+ ion with our stimulated Brillouin scattering laser and achieve a clock exhibiting short-term stability of 3.9 × 10−14 over one second—an improvement of an order of magnitude over state-of-the-art microwave clocks. This performance increase within a potentially portable system presents a compelling avenue for substantially improving existing technology, such as the global positioning system, and also for enabling the exploration of topics such as geodetic measurements of the Earth, searches for dark matter and investigations into possible long-term variations of fundamental physics constants.
READ LESS

Summary

Microwave atomic clocks have traditionally served as the 'gold standard' for precision measurements of time and frequency. However, over the past decade, optical atomic clocks have surpassed the precision of their microwave counterparts by two orders of magnitude or more. Extant optical clocks occupy volumes of more than one cubic...

READ MORE

MOVPE growth of LWIR AlInAs/GaInAs/InP quantum cascade lasers: impact of growth and material quality on laser performance

Summary

The quality of epitaxial layers in quantum cascade lasers (QCLs) has a primary impact on QCL performance, and establishing correlations between epitaxial growth and materials properties is of critical importance for continuing improvements. We present an overview of the growth challenges of these complex QCL structures; describe the metalorganic vapor phase epitaxy growth of AlInAs/GaInAs/InP QCL materials; discuss materials properties that impact QCL performance; and investigate various QCL structure modifications and their effects on QCL performance. We demonstrate uncoated buried-heterostructure 9.3-um QCLs with 1.32-W continuous-wave output power and maximum wall plug efficiency (WPE) of 6.8%. This WPE is more than 50% greater than previously reported WPEs for unstrained QCLs emitting at 8.9 um and only 30% below strained QCLs emitting around 9.2 um.
READ LESS

Summary

The quality of epitaxial layers in quantum cascade lasers (QCLs) has a primary impact on QCL performance, and establishing correlations between epitaxial growth and materials properties is of critical importance for continuing improvements. We present an overview of the growth challenges of these complex QCL structures; describe the metalorganic vapor...

READ MORE

Photonic lantern kW-class fiber amplifier

Published in:
Opt. Express, Vol. 25, No. 22, 30 October 2017, pp. 27543-27550.

Summary

Pump-limited kW-class operation in a multimode fiber amplifier using adaptive mode control and a photonic lantern front end was achieved. An array of three single-mode fiber inputs was used to adaptively inject the appropriate superposition of input modes in a three-mode gain fiber to achieve the desired mode at the output. Mode fluctuations at high power were compensated by adjusting the relative phase, amplitude, and polarization of the single-mode fiber inputs. The outlook for further power scaling and adaptive-optic compensation is described.
READ LESS

Summary

Pump-limited kW-class operation in a multimode fiber amplifier using adaptive mode control and a photonic lantern front end was achieved. An array of three single-mode fiber inputs was used to adaptively inject the appropriate superposition of input modes in a three-mode gain fiber to achieve the desired mode at the...

READ MORE

Efficient cryogenic near-infrared Tm:YLF laser

Published in:
Opt. Express, Vol. 25, No. 12, 12 June 2017, 13408.

Summary

Operation of a cw thulium laser emitting at 816 nm has been demonstrated in bulk Tm:YLF with 46% slope efficiency. Prior cw demonstrations of this transition have been limited to ZBLAN fiber hosts and prior lasing in bulk crystalline host material has been limited to quasi-cw operation due to population trapping. Trapping at the 3F4 level was mitigated by co-lasing at 1876 nm. The co-lasing technique should be applicable to room-temperature operation and to power scaling of YLF and other crystal hosts.
READ LESS

Summary

Operation of a cw thulium laser emitting at 816 nm has been demonstrated in bulk Tm:YLF with 46% slope efficiency. Prior cw demonstrations of this transition have been limited to ZBLAN fiber hosts and prior lasing in bulk crystalline host material has been limited to quasi-cw operation due to population...

READ MORE

Aircraft laser strike geolocation system

Published in:
17th AIAA Aviation Technology, Integration, and Operations Conf., 5-9 June 2017.

Summary

Laser strikes against aircraft are increasing at an alarming rate, driven by the availability of cheap powerful lasers and a lack of deterrence due to the challenges of locating and apprehending perpetrators. Although window coatings and pilot goggles effectively block laser light, uptake has been low due to high cost and pilot reluctance. This paper describes the development and testing of a proof-of-concept ground based sensor system to rapidly geolocate the origin of a laser beam in a protected region of airspace and disseminate this information to law enforcement to allow a timely and targeted response. Geolocation estimates with accuracies of better than 20 m have been demonstrated within 30 seconds of an event at a range of 8.9 nmi with a 450 mW laser. Recommendations for an operational prototype at an airport are also described.
READ LESS

Summary

Laser strikes against aircraft are increasing at an alarming rate, driven by the availability of cheap powerful lasers and a lack of deterrence due to the challenges of locating and apprehending perpetrators. Although window coatings and pilot goggles effectively block laser light, uptake has been low due to high cost...

READ MORE

Picosecond kilohertz-class cryogenically cooled multistage Yb-doped chirped pulse amplifier

Published in:
Opt. Lett., Vol. 42, No. 4, 15 February 2017, pp. 707-710.

Summary

A multistage cryogenic chirped pulse amplifier has been developed, utilizing two different Yb-doped gain materials in subsequent amplifier stages. A Yb:GSAG regenerative amplifier followed by a Yb:YAG power amplifier is able to deliver pulses with a broader bandwidth than a system using only one of these two gain media throughout. We demonstrate 90 mJ of pulse energy (113 W of average power) uncompressed and 67 mJ (84 W of average power) compressed at 1.25 kHz pulse repetition frequency, 3.0 ps FWHM Gaussian pulse width, and near-diffraction-limited (M^2 < 1.3) beam quality.
READ LESS

Summary

A multistage cryogenic chirped pulse amplifier has been developed, utilizing two different Yb-doped gain materials in subsequent amplifier stages. A Yb:GSAG regenerative amplifier followed by a Yb:YAG power amplifier is able to deliver pulses with a broader bandwidth than a system using only one of these two gain media throughout...

READ MORE

Spatially-resolved individual particle spectroscopy using photothermal modulation of Mie scattering

Summary

We report a photothermal modulation of Mie scattering (PMMS) method that enables concurrent spatial and spectral discrimination of individual micron-sized particles. This approach provides a direct measurement of the "fingerprint" infrared absorption spectrum with the spatial resolution of visible light. Trace quantities (tens of picograms) of material were deposited onto an infrared transparent substrate and simultaneously illuminated by a wavelength-tunable intensity-modulated quantum cascade pump laser and a continuous-wave 532 nm probe laser. Absorption of the pump laser by the particles results in direct modulation of the scatter field of the probe laser. The probe light scattered from the interrogated region is imaged onto a visible camera, enabling simultaneous probing of spatially-separated individual particles. By tuning the wavelength of the pump laser, the IR absorption spectrum is obtained. Using this approach, we measured the infrared absorption spectra of individual 3 um PMMA and silica spheres. Experimental PMMS signal amplitudes agree with modeling using an extended version of the Mie scattering theory for particles on substrates, enabling the prediction of the PMMS signal magnitude based on the material and substrate properties.
READ LESS

Summary

We report a photothermal modulation of Mie scattering (PMMS) method that enables concurrent spatial and spectral discrimination of individual micron-sized particles. This approach provides a direct measurement of the "fingerprint" infrared absorption spectrum with the spatial resolution of visible light. Trace quantities (tens of picograms) of material were deposited onto...

READ MORE

Diode-pumped narrow linewidth multi-kW metalized Yb fiber amplifier

Published in:
Advanced Solid State Lasers, 30 October - 3 November 2016.

Summary

We investigate high brightness pumping of a multi-kW Yb fiber amplifier in a bi-directional pumping configuration. Each pump outputs 2 kW in a 200 um, 0.2 NA multi-mode fiber. Gold-coated specialty gain fibers, with 17 um MFD and 5-dB/meter pump absorption, have been developed. The maximum fiber amplifier output power is 3.1 kW, limited by multi-mode instability, with 90% O-O efficiency 12 GHz Linewidth and M2 < 1.15.
READ LESS

Summary

We investigate high brightness pumping of a multi-kW Yb fiber amplifier in a bi-directional pumping configuration. Each pump outputs 2 kW in a 200 um, 0.2 NA multi-mode fiber. Gold-coated specialty gain fibers, with 17 um MFD and 5-dB/meter pump absorption, have been developed. The maximum fiber amplifier output power...

READ MORE

Photonic lantern adaptive spatial mode control in LMA fiber amplifiers

Published in:
Opt. Express, Vol. 24, No. 4, 22 February 2016, pp. 3405-13.

Summary

We demonstrate adaptive-spatial mode control (ASMC) in few-moded double-clad large mode area (LMA) fiber amplifiers by using an all-fiber-based photonic lantern. Three single-mode fiber inputs are used to adaptively inject the appropriate superposition of input modes in a multimode gain fiber to achieve the desired mode at the output. By actively adjusting the relative phase of the single-mode inputs, near-unity coherent combination resulting in a single fundamental mode at the output is achieved.
READ LESS

Summary

We demonstrate adaptive-spatial mode control (ASMC) in few-moded double-clad large mode area (LMA) fiber amplifiers by using an all-fiber-based photonic lantern. Three single-mode fiber inputs are used to adaptively inject the appropriate superposition of input modes in a multimode gain fiber to achieve the desired mode at the output. By...

READ MORE

Coherent beam-combining of quantum cascade amplifier arrays

Summary

We present design, packaging and coherent beam combining of quantum cascade amplifier (QCA) arrays, measurements of QCA phase noise, the drive-current-to-optical-phase transfer function, and the small signal gain for QCAs.
READ LESS

Summary

We present design, packaging and coherent beam combining of quantum cascade amplifier (QCA) arrays, measurements of QCA phase noise, the drive-current-to-optical-phase transfer function, and the small signal gain for QCAs.

READ MORE