Publications
Tagged As
Weather sensing and data fusion to improve safety and reduce delays at major west coast airports
November 30, 1999
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-290
Summary
The objective of this study was to analyze the weather sensing and data fusion required to improve safety and reduce delays at a number of west coast airports that are not currently scheduled to receive an Integrated Terminal Weather System (ITWS). This report considers the Los Angeles (LAX), San Francisco (SFO), Seattle (SEA) and Portland, OR (PDX) international airports. A number of visits were made to the various ATC facilities to better understand their weather decision support operational needs. Analyses were made of an incident of lightning strikes to two aircraft at SEA in February 1999, and a prototype terminal winds product was developed for LAX that uses profilers as well as plane reports to update the the National Weather Service (NWS) Rapid Update Cycle (RUC) winds estimates. We found that an augmented ITWS could potentially address safety concerns for triggered lightning strikes and vertical wind shear in winter storms at Portland and Seattle. An augmented ITWS terminal winds product (that uses wind profiler data in addition to the current ITWS sensors) could provide very large delay reductions for LAX and SFO during winter storms as a component of a wake vortex advisory system. This augmented product also could provide significant delay reduction benefits at SEA. The sensors required to obtain the projected benefits at SFO do not exist currently. Portland may warrant additional sensors to address the vertical wind shear problems, and LAX would require additional sensors for a wake vortex advisory system. We recommend near-term experimental measurements at PDX to determine the optimum sensor mix and that an operational evaluation of the prototype augmented ITWS terminal winds product be carried out at LAX to determine if the current sensor mix can meet operational needs. Lightning strike data at SEA and PDX should be analyzed to determine if a proposed triggered lightning predictant is accurate.
Summary
The objective of this study was to analyze the weather sensing and data fusion required to improve safety and reduce delays at a number of west coast airports that are not currently scheduled to receive an Integrated Terminal Weather System (ITWS). This report considers the Los Angeles (LAX), San Francisco...
READ MORE
A comparative study of existing and proposed FAA and Eurocontrol CHIs for en route air traffic control
September 26, 1999
Conference Paper
Published in:
44th Annual Air Traffic Control Association Conf. Proc., 26-30 September 1999, pp. 22-26.
Summary
In this paper we present a comparison of the Computer Human Interface (CHI) similarities and differences among the key Free Flight Phase 1 (FFP1) products for en route air traffic control (ATC) and air traffic control management (ATM) as well as some recent Eurocontrol-based CHI innovations. Our comparative study focuses on details of these disparate CHIs and the potential introduction of advanced graphical interactive features seen in the Eurocontrol CHI. Active US controllers who participated in Eurocontrol's Operational Display and Input Development (ODID) study have requested that the FAA develop an alternative CHI based on ODID and its successors such as the Denmark Sweden Interface (DSI). MIT Lincoln Laboratory has built a CHI Requirements Engineering Model (CREM) to support testing of an alternative ODID-like CHI that is feasible given the newly deployed Display System Replacement (DSR).
Summary
In this paper we present a comparison of the Computer Human Interface (CHI) similarities and differences among the key Free Flight Phase 1 (FFP1) products for en route air traffic control (ATC) and air traffic control management (ATM) as well as some recent Eurocontrol-based CHI innovations. Our comparative study focuses...
READ MORE
An evaluation of the ASR-9 weather channel based on observations from the ITWS prototypes
September 23, 1999
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-270
Summary
The Federal Aviation Administration's (FAA) Airport Surveillance Radar (ASR-9) is a high-scan-rate system which provides a "critical" function in terms of air traffic control (ATC). In addition to its primary role of air traffic surveillance, the system also generates precipitation data for display on air traffic specialists' radar scopes and for use by automated systems such as the Integrated Terminal Weather System (ITWS) and Weather Systems Processor (WSP). Air traffic managers use these data to provide optimum routes for aircraft operating in and near the Terminal Radar Approach Control (TRACON) airspace. The primary advantage of the ASR-9 - as an aviation weather radar - over either the Terminal Doppler Weather Radar (TDWR) or the Next Generation Weather Radar (NEXRAD) is the rapid update rate, i.e., 30 seconds, which provides air traffic managers with a more accurate representation of weather echo location within the sensor's domain. This is far superior toeither the TDWR or NEXRAD, which takes from 2.5 to 6 minutes to create a volume scan, depending on the scan strategy. The sensor is also quite reliable, with limited down time. An analysis of ASR-9 data from the ITWS prototypes has uncovered a number of problems, which impact the quality of the precipitation data. The data quality issues discussed are overly aggressive ground clutter suppression, polarization mode issues, hardware failures associated with high beandlow beam switching, attenuatiodsignal depolarization, beam-filling losses, bright- band contamination, distant weather contamination, calibration issues, and radadantenna failures. The recommendations to address the ASR-9 data quality issues can be grouped into three categories: "Variable Site Parameter (VSP)" adjustments, hardware component maintenance checks, and automated flagging of data quality problems. The report includes discussion of the frequency and characteristics of each degradation, presenting both hardware and non- hardware related problems, and concludes with proposed solutions to the problems and recommendations designed to improve the overall utility of the ASR-9 precipitation data.
Summary
The Federal Aviation Administration's (FAA) Airport Surveillance Radar (ASR-9) is a high-scan-rate system which provides a "critical" function in terms of air traffic control (ATC). In addition to its primary role of air traffic surveillance, the system also generates precipitation data for display on air traffic specialists' radar scopes and...
READ MORE
Operational and spectrum tests for ATIDS at Dallas/Fort Worth Airport
September 20, 1999
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-272
Summary
Runway Incursion (RI) prevention is on the National Transportation Safety Board's (NTSB) list of "10 Most Wanted" safety improvements. Improved surveillance on the airport surface is an important ingredient in that it improves situational awareness and improves the accuracy of tracks used by automation algorithms. Towards this goal, the Runway Incursion Reduction Program (RIRP) has been developing the Airport Target Identification System (ATIDS). ATIDS is a prototype multilateration and Automatic Dependent Surveillance - Broadcast (ADS-B) system. It requires the enabling of existing transponders on the airport surface....The RIRP team, which includes the FAA Volpe National Transportation Systems Center, Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) and Trios Associates, Inc., has conducted interferences tests at Dallas/Fort Worth Airport (DFW) to quantify the impact that ATIDS would have on that high-use environment. The tests included environmental 1040/1090 MHz measurements, ATCRBS false target investigations, and Mode S interrogation tests. This document reports the results of these tests. [Not complete].
Summary
Runway Incursion (RI) prevention is on the National Transportation Safety Board's (NTSB) list of "10 Most Wanted" safety improvements. Improved surveillance on the airport surface is an important ingredient in that it improves situational awareness and improves the accuracy of tracks used by automation algorithms. Towards this goal, the Runway...
READ MORE
Review of NYC ITWS during the September 7, 1998 severe weather event
May 26, 1999
Project Report
Published in:
Project Report ATC-269, MIT Lincoln Laboratory
Summary
The New York City Integrated Terminal Weather System (ITWS) prototype became operational for the first time on August 30, 1998. Although this was near the end of the region's convective season, site staff were afforded a unique chance to assess the system's performance during Labor Day weekend on the afternoon of September 7 when a line of severe thunderstorms wreaked havoc over large areas of the Tri-state region. The storm with gusts reported as high as 80 mph, caused fatalities as boats overturned and trees fell on cars. Tornadoes were confirmed over New Jersey and Long Island, with major structural damage occurring in other areas as the result of strong straight-line winds and hail reported as large as 1.75 inches in diameter. Significant airport delays were experienced at the three major New York airports (over 600 flights delayed at least 15 minutes) and several hundred flights were cancelled. This report will assess the performance of ITWS and NEXRAD products during the time severe weather impacted the TRACON area, from about 1700 to 1930 UTC on September 7 (hereafter all times will be given in UTC). It will also discuss the synoptic weather setting and conclude with a section on the operational benefits users derived from ITWS on this day.
Summary
The New York City Integrated Terminal Weather System (ITWS) prototype became operational for the first time on August 30, 1998. Although this was near the end of the region's convective season, site staff were afforded a unique chance to assess the system's performance during Labor Day weekend on the afternoon...
READ MORE
Lessons learned designing an alternative CHI for en route air traffic control
April 27, 1999
Conference Paper
Published in:
Controller Centered HMI, 27-29 April 1999.
Summary
MIT Lincoln Laboratory is supporting the FAA-sponsored effort to design an operationally suitable Computer Human Interface (CHI) for the recently upgraded En Route Air Traffic Control Centers. All centers will soon receive new control consoles with state-of-the-art 20 square (2K by 2K resolution) color displays (currently operating in Seattle as of January 1999). The future CHI is being modeled on Eurocontrol's Operational Display and Input Development (ODID) CHI, as requested by active controllers in the US. The ODID-like CHI, with its minimal information display and color coded guidance, provides increased efficiency and productivity through employment of a modern graphical user interface. Lessons learned during the on-going design process, including research of look and feel issues in conjunction with data analysis from controller-in-the-loop testing of a prototype ODID-like CHI will be discussed. The Laboratory plans to model the alternative ODID-like CHI on the best of the European ODID, Denmark Sweden Interface (DSI) and EATCHIP CHI features, while cognizant of the FAA?s DSR capabilities and limitations to support an improved user interface. Human factors issues need resolution to provide a consistent look and feel across the Free Flight Phase 1 products and platforms, the Center TRACON Automation System (CTAS) and the User Request Evaluation Tool (URET). MIT Lincoln Laboratory has built a CHI Requirements Engineering Model (CREM) to support controller-in-the-loop testing of the ODID-like CHI, validate CHI requirements and determine applicable standards for the design of an integrated CHI. The CREM provides a means to assess various CHI alternatives and the capability to iterate options with controller teams to address user concerns. Lessons learned from the ODID-like CHI specification process will also be shared.
Summary
MIT Lincoln Laboratory is supporting the FAA-sponsored effort to design an operationally suitable Computer Human Interface (CHI) for the recently upgraded En Route Air Traffic Control Centers. All centers will soon receive new control consoles with state-of-the-art 20 square (2K by 2K resolution) color displays (currently operating in Seattle as...
READ MORE
Development of improved TCAS II surveillance and interference limiting functions
January 1, 1999
Journal Article
Published in:
Air Traffic Control Q., Vol. 7, No. 1, 1999, pp. 19-46.
Summary
This paper describes the development and validation of improved TCAS II intruder surveillance tracking and interference limiting algorithms. Improvements in interference limiting were prompted by the FAA Spectrum Management Office and by international aviation administrations in order to further reduce interference to ground-based air traffic control surveillance by TCAS II. Improvements in surveillance tracking were prompted by aircarrier pilot organizations in order to increase the level of traffic situational awareness offered by the TCAS II display. The new algorithms are included in a proposed new version of TCAS II MOPS DO-185A which is commonly referred to as Change 7.0. TCAS II change 7.0 units will be introduced into the US airspace beginning as early as 1999 as part of a program to implement improvements in both TCAS II surveillance and collision avoidance.
Summary
This paper describes the development and validation of improved TCAS II intruder surveillance tracking and interference limiting algorithms. Improvements in interference limiting were prompted by the FAA Spectrum Management Office and by international aviation administrations in order to further reduce interference to ground-based air traffic control surveillance by TCAS II...
READ MORE
TCAS II use of ADS-B surveillance data through hybrid surveillance
January 1, 1999
Journal Article
Published in:
Air Traffic Control Q., Vol. 7, No. 2, 1999, pp. 109-121.
Summary
This paper describes a technique that enables TCAS II to use passive surveillance data obtained via extended squitter, an implementation of automatic dependent surveillance broadcast (ADS-B). The technique, known as hybrid surveillance, is based upon the use of TCAS active surveillance to perform validation of the reported ADS-B position at track acquisition. Aircraft that pass initial validation are maintained on passive surveillance until they become a near threat. At that time, TCAS begins regular active surveillance and thus uses its current surveillance techniques for traffic and resolution advisories. In this way, TCAS is able to use passive extended squitter data while retaining its role as an independent monitor. Simulation results show that the use of passive information for non-threatening aircraft results in a significant decrease in TCAS interrogation rate. This enables TCAS to delay or avoid the range reduction that is now required in order for TCAS to remain within its interference budget in high traffic density airspace. Maintaining TCAS operating range in high density air-space enhances TCAS ability to support situational awareness for the flight crew.
Summary
This paper describes a technique that enables TCAS II to use passive surveillance data obtained via extended squitter, an implementation of automatic dependent surveillance broadcast (ADS-B). The technique, known as hybrid surveillance, is based upon the use of TCAS active surveillance to perform validation of the reported ADS-B position at...
READ MORE
En route ATM decision support tool computer-human interface requirements development
December 1, 1998
Conference Paper
Published in:
2nd USA/Europe Air Traffic Management R&D Seminar, 1-4 December 1998.
Summary
MIT Lincoln Laboratory (MIT/LL) is supporting the FAA-sponsored effort to specify Computer Human Interface (CHI) requirements for the En Route Air Traffic Management Decision Support Tools (ERATMDST) program. The ERATMDST CHI specification is the FAA's vehicle to ensure an operationally suitable user interface is provided for the DSTs (such as conflict probe) to support free flight. The initial draft of the ERATMDST CHI requirements was published in September 1998 and defines an initial CHI which incorporates elements of the NASA CTAS and the MITRE URET prototypes, an Operational Display and Input Development (ODID) display philosophy, and an outline of the end-state CHI. The information will be presented with a consistent, usable look and feel modeled on the advanced human-centered CHI developed by Eurocontrol. This paper describes a CHI Requirements Engineering Model (CREM) and presents preliminary test results of ODID-like display elements in the ERATMDST CHI with controller-in- the-loop simulations presented in terms of workload and response times.
Summary
MIT Lincoln Laboratory (MIT/LL) is supporting the FAA-sponsored effort to specify Computer Human Interface (CHI) requirements for the En Route Air Traffic Management Decision Support Tools (ERATMDST) program. The ERATMDST CHI specification is the FAA's vehicle to ensure an operationally suitable user interface is provided for the DSTs (such as...
READ MORE
Airbus 320 performance during ATC-directed breakouts on final approach
November 20, 1998
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-265
Summary
An evaluation of Airbus 320 (A320) performance during ATC-directed breakouts was conducted in a two-part study during 1995. Phase 1 tested the combined effect of proposed ATC phraseology, pilot situational awareness training, and an A320-specific breakout procedure on performance. Pilot training included a briefing and viewing a videotape, but no simulator practice. Turn performance statistics from the Precision Runway Monitor Demonstration Program were used as the test criteria. Pilot preferences regarding procedures and the training material were also elicited. Three conclusions were: (1) breakout performance given the tested combination of pilot training and proposed ATC phraseology did meet the test criteria; (2) breakout performance given existing procedures did not meet the test criteria; and (3) the tested breakout procedure should be refined because it conflicted with other cockpit procedures and increased the transition time to a positive climb rate. Based on the results of this study, it is recommended that a combination of pilot situational awareness training, A320 breakout procedure, and modified ATC breakout phraseology equivalent to that tested in Phase 2 be employed for simultaneous parallel approach operations in instrument meteorological conditions.
Summary
An evaluation of Airbus 320 (A320) performance during ATC-directed breakouts was conducted in a two-part study during 1995. Phase 1 tested the combined effect of proposed ATC phraseology, pilot situational awareness training, and an A320-specific breakout procedure on performance. Pilot training included a briefing and viewing a videotape, but no...
READ MORE