Publications
The 2013 Buffalo Area Icing and Radar Study (BAIRS)
March 6, 2015
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-419
Summary
The Next Generation Weather Radar (NEXRAD) network completed a dual polarization upgrade in 2013. The radars now can be used to sense the type of scatterers that cause the radar returns. The scatterers can be hydrometeors, biologicals, or earth-sourced. The ability to reliably interpret the radar-sensed thermodynamic phase of the hydrometeors (solid, liquid, mix) in the context of cloud microphysics and precipitation physics makes it possible to assess the icing hazard potential to aviation. That assessment for Federal Aviation Administration (FAA) purposes would necessarily be performed by automated algorithms based in hydrometeor classification terms. The truth as to the icing hazard aloft (where the radar scans) is required to ascertain the value of such algorithms. The Buffalo Area Icing and Radar Study (BAIRS) of 2013 was a partnership between MIT Lincoln Laboratory (LL) and the National Research Council of Canada (NRC) to perform in situ icing missions within the surveillance range of the dual polarization NEXRAD in Buffalo, NY. The goal of these 2013 missions, and the subject of this report, was to target specific winter weather scenarios known to exhibit an aviation icing hazard for the purpose of quantifying the microphysical properties of the target zones and verifying the presence of supercooled liquid water (SLW) to support validation of hydrometeor classification algorithms. These are the first such missions to execute in situ measurements within a NEXRAD's surveillance range running with the fielded, operational NEXRAD hydrometeor classifier. NRC's Convair-580 instrumented research plane was used for three icing missions covering 14 hours. Three distinctly different winter weather scenarios were encountered. This document details the analysis of in situ data such as particle type and liquid water content (LWC) with NEXRAD dual polarization parameters for the three missions. The BAIRS analysis identified these key findings: -NEXRAD radar returns are prevalent in conditions of supercooled water, -NEXRAD classification shows positive results based on particle imagery, -NEXRAD "dry snow" class masks the presence of mixed phase potential icing hazard, -NEXRAD "unknown" class contains diverse regions of icing hazard potential, and there are methods to classify some of these regions, and -In situ aircraft observations are an important tool to both verify algorithm performance and guide further development.
Summary
The Next Generation Weather Radar (NEXRAD) network completed a dual polarization upgrade in 2013. The radars now can be used to sense the type of scatterers that cause the radar returns. The scatterers can be hydrometeors, biologicals, or earth-sourced. The ability to reliably interpret the radar-sensed thermodynamic phase of the...
READ MORE
Measurements of differential reflectivity in snowstorms and warm season stratiform systems
March 1, 2015
Journal Article
Published in:
J. Appl. Meteor. Climatol., Vol. 54, No. 3, 2015, pp. 573-95.
Summary
The organized behavior of differential radar reflectivity (ZDR) is documented in the cold regions of a wide variety of stratiform precipitation types occurring in both winter and summer. The radar targets and attendant cloud microphysical conditions are interpreted within the context of measurements of ice crystal types in laboratory diffusion chambers in which humidity and temperature are both stringently controlled. The overriding operational interest here is in the identification of regions prone to icing hazards with long horizontal paths. Two predominant regimes are identified: category A, which is typified by moderate reflectivity (from 10 to 30 dBZ) and modest +ZDR values (from 0 to 13 dB) in which both supercooled water and dendritic ice crystals (and oriented aggregates of ice crystals) are present at a mean temperature of -13 degrees C, and category B, which is typified by small reflectivity (from -10 to +10 dBZ) and the largest +ZDR values (from +3 to +7 dB), in which supercooled water is dilute or absent and both flat-plate and dendritic crystals are likely. The predominant positive values for ZDR in many case studies suggest that the role of an electric field on ice particle orientation is small in comparison with gravity. The absence of robust +ZDR signatures in the trailing stratiform regions of vigorous summer squall lines may be due both to the infusion of noncrystalline ice particles (i.e., graupel and rimed aggregates) from the leading deep convection and to the effects of the stronger electric fields expected in these situations. These polarimetric measurements and their interpretations underscore the need for the accurate calibration of ZDR.
Summary
The organized behavior of differential radar reflectivity (ZDR) is documented in the cold regions of a wide variety of stratiform precipitation types occurring in both winter and summer. The radar targets and attendant cloud microphysical conditions are interpreted within the context of measurements of ice crystal types in laboratory diffusion...
READ MORE
Advisory services for user composition tools
February 7, 2015
Conference Paper
Published in:
9th IEEE Int. Conf. on Semantic Computing, IEEE ICSC 2015, 7-9 February 2015.
Summary
We have developed an ontology based framework that evaluates compatibility between processing modules within an end user development framework, using MIT Lincoln Laboratory's Composable Analytics environment as a test case. In particular, we focus on inter-module semantic compatibility as well as compatibility between data and modules. Our framework includes a core ontology that provides an extendible vocabulary that can describe module attributes, module input and output requirements and preferences, and data characteristics that are pertinent to selecting appropriate modules in a given situation. Based on the ontological description of the modules and data, we first present a framework that takes a rule based approach in measuring semantic compatibility. Later, we extend the rule based approach to a flexible fuzzy logic based semantic compatibility evaluator. We have built an initial simulator to test module compatibility under varying situations. The simulator takes in the ontological description of the modules and data and calculates semantic compatibility. We believe the framework and simulation environment together will help both the developers test new modules they create as well as support end users in composing new capabilities. In this paper, we describe the details of the framework, the simulation environment, and our iterative process in developing the module ontology.
Summary
We have developed an ontology based framework that evaluates compatibility between processing modules within an end user development framework, using MIT Lincoln Laboratory's Composable Analytics environment as a test case. In particular, we focus on inter-module semantic compatibility as well as compatibility between data and modules. Our framework includes a...
READ MORE
Terminal Flight Data Manager (TFDM) runway balancing capability assessment
February 6, 2015
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-421
Summary
Under the Terminal Flight Data Manager program, new operational improvements are envisioned at a number of large airports. One operational improvement manifests through the Airport Resource Management tool, which seeks to balance departure demand at runways. Another related operational improvement is runway balancing, which is expected to provide greater flexibility in tactical runway assignments. Both improvements are expected to reduce surface delays for departing aircraft. This report provides a study into the potential delay-reduction benefits of both capabilities at three case-study airports (DFW, LAX, and MCO). Through a series of simulation studies, it is found that the benefits associated with each operational improvement are closely linked to departure demand and imbalances in demand across filed aircraft departure procedures. So, while large delay-reduction benefits are expected at LAX--which exhibits both large demand and departure imbalances--smaller benefits are expected at DFW where departure operations are already well-balanced. Meanwhile at MCO, the operational improvements are not expected to reduce delays due to limited departure demand at the airport.
Summary
Under the Terminal Flight Data Manager program, new operational improvements are envisioned at a number of large airports. One operational improvement manifests through the Airport Resource Management tool, which seeks to balance departure demand at runways. Another related operational improvement is runway balancing, which is expected to provide greater flexibility...
READ MORE
Wind Information Requirements for NextGen Applications - Phase 3 Final Report(3.98 MB)
December 15, 2014
Project Report
Published in:
Project Report ATC-422, MIT Lincoln Laboratory
Summary
Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. The work described in this report summarizes the activities conducted in FY14, which builds upon prior work.
Summary
Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. The work described in...
READ MORE
Wind information requirements for NextGen applications, phase 3 final report
December 15, 2014
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-422
Summary
Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. Any errors in the ground and/or aircraft wind information relative to the truth winds actually flown through can significantly degrade the performance of the procedure. Unacceptable performance could be mitigated by improving wind information in the aircraft, for example, by using higher accuracy wind forecast models to generate wind inputs for the ground or airborne systems, updating wind information more frequently, or to upgrade the way winds are handled in the avionics systems. The work described in this report summarizes the activities conducted in FY14, which builds upon prior work. It (1) establishes the relationship of wind information accuracy to 4D-TBO and IM performance for a selection of operationally relevant scenarios to identify wind needs to support them, and (2) presents examples of what wind information content and update rate to the aircraft will deliver a given target performance level to help inform concept of operations development and datalink technology needs.
Summary
Many NextGen applications depend on access to high accuracy wind data due to time-based control elements, such as required time of arrival at a meter fix under 4D-Trajectory-Based Operations/Time of Arrival Control procedures or compliance to an assigned spacing goal between aircraft under Interval Management procedures. Any errors in the...
READ MORE
Wind information requirements for NextGen applications - phase 2 final report - framework refinement and application to four-dimensional trajectory based operations (4D-TBO) and interval management (IM)
May 20, 2014
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-418
Summary
Accurate wind information is of fundamental importance to some of the critical future air traffic concepts under the FAA's Next Generation Air Transportation System (NextGen) initiative. Concepts involving time elements, such as Four-Dimensional Trajectory Based Operations (4D-TBO) and Interval Management (IM), are especially sensitive to wind information accuracy. There is a growing need to establish appropriate concepts of operation and target performance requirements accounting for wind information accuracy for these types of procedure, and meeting these needs is the purpose of this project. In the first phase of this work, a Wind Information Analysis Framework was developed to help explore the relationship of wind information to NextGen application performance. A refined version of the framework has been developed for the Phase 2 work that highlights the role stakeholders play in defining Air Traffic Control (ATC) scenarios, distinguishes wind scenarios into benign, moderate, severe, and extreme categories, and more clearly identifies what and how wind requirements recommendations are developed from the performance assessment trade-spaces. This report documents how this refined analysis framework has been used in Phase 2 of the work in terms of: -Refined wind information metrics and wind scenario selection process applicable to a broader range of NextGen applications, with particular focus on 4D-TBO and IM. -Expanded and refined studies of 4D-TBO applications with current Flight Management Systems (FMS) (with MITRE collaboration) to identify more accurate trade-spaces using operational FMS capabilities with higher-fidelity aircraft models. -Expansion of the 4D-TBO study using incremental enhancements possible in future FMSs (with Honeywell collaboration), specifically in the area of wind blending algorithms to quantify performance improvement potential from near-term avionics refinements. -Demonstrating the adaptability of the Wind Information Analysis Framework by using it to identify initial wind information needs for IM applications.
Summary
Accurate wind information is of fundamental importance to some of the critical future air traffic concepts under the FAA's Next Generation Air Transportation System (NextGen) initiative. Concepts involving time elements, such as Four-Dimensional Trajectory Based Operations (4D-TBO) and Interval Management (IM), are especially sensitive to wind information accuracy. There is...
READ MORE
Unmanned aircraft sense and avoid radar: surrogate flight testing performance evaluation
May 19, 2014
Conference Paper
Published in:
RadarCon14: IEEE Radar Conf., 19-23 May 2014.
Summary
Unmanned aircraft systems (UAS) have proven to have distinct advantages compared to manned aircraft for a variety of tasks. Current airspace regulations require a capability to sense and avoid other aircraft to replace the ability of a pilot to see and avoid other traffic. A prototype phased-array radar was developed and tested to demonstrate a capability to support the sense and avoid (SAA) requirement and to validate radar performance models. Validated radar models enable evaluation of other radar systems in simulation. This paper provides an overview of the unique radar technology, and focuses on radar performance and model validation as demonstrated through a flight testing campaign. Performance results demonstrate that the prototype SAA radar system can provide sufficient accuracy to sense avoid non-cooperative aircraft.
Summary
Unmanned aircraft systems (UAS) have proven to have distinct advantages compared to manned aircraft for a variety of tasks. Current airspace regulations require a capability to sense and avoid other aircraft to replace the ability of a pilot to see and avoid other traffic. A prototype phased-array radar was developed...
READ MORE
Wind Information Requirements for NextGen Applications - Phase 2 Final Report(7.63 MB)
May 1, 2014
Project Report
Published in:
Project Report ATC-418, MIT Lincoln Laboratory
Summary
Accurate wind information is of fundamental importance to some of the critical future air traffic concepts envisioned under the FAA’s Next Generation Air Transportation System (NextGen) initiative. In the first phase of this work, a Wind Information Analysis Framework was developed to help explore the relationship of wind information to NextGen application performance. A refined version of the framework has been developed for the Phase 2 work.
Summary
Accurate wind information is of fundamental importance to some of the critical future air traffic concepts envisioned under the FAA’s Next Generation Air Transportation System (NextGen) initiative. In the first phase of this work, a Wind Information Analysis Framework was developed to help explore the relationship of wind information to...
READ MORE
Secondary Surveillance Phased Array Radar (SSPAR): initial feasibility study
February 6, 2014
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-416
Topic:
R&D area:
Summary
The U.S. Federal Aviation Administration is deploying Automatic Dependent Surveillance-Broadcast (ADS-B) to provide next-generation surveillance derived through down- and cross-link of global positioning satellite (GPS) navigation data. While ADS-B will be the primary future surveillance system, FAA recognizes that backup surveillance capabilities must be provided to assure that air traffic control (ATC) services can continue to be provided when individual aircraft transponders fail and during localized, short-duration GPS outages. This report describes a potential ADS-B backup capability, Secondary Surveillance Phased Array Radar or SSPAR. SSPAR will interrogate aircraft transponders and receive replies using a sparse, non-rotating array of approximately 17 omnidirectional (in azimuth) antennae. Each array element will transmit and receive independently so as to form directional transmit beams for transponder interrogation, and support high-resolution direction finding for received signals. Because each SSPAR element is independently digitized, transponder returns from all azimuths can be equipped with Traffic Alert and Collision Avoidance System (TCAS) and ADS-B avionics to reduce spectrum usage and maintain the high surveillance update rate (~1 per second) achieved by ADS-B. Recurring costs for SSPAR will be low since it involves no moving parts and the number of array channels is small. This report describes an SSPAR configuration supporting terminal operations. We consider interrogation and receive approaches, antenna array configuration, signal processing and preliminary performance analysis. An analysis of SSPAR's impact on spectrum congestion in the beacon radar band is presented, as are concepts for integrating SSPAR and next generation primary radar to improve the efficiency and accuracy of aircraft and weather surveillance.
Summary
The U.S. Federal Aviation Administration is deploying Automatic Dependent Surveillance-Broadcast (ADS-B) to provide next-generation surveillance derived through down- and cross-link of global positioning satellite (GPS) navigation data. While ADS-B will be the primary future surveillance system, FAA recognizes that backup surveillance capabilities must be provided to assure that air traffic...
READ MORE