Publications

Refine Results

(Filters Applied) Clear All

By

Using 3D printing to visualize social media big data

July 23, 2014
  |
Journal Article
Author:
Zachary J. Weber
…
Published in:
HPEC 2014: IEEE Conf. on High Performance Extreme Computing, 9-11 September 2014.
Topic:
3D printing
R&D area:
R&D group:

Summary

Big data volume continues to grow at unprecedented rates. One of the key features that makes big data valuable is the promise to find unknown patterns or correlations that may be able to improve the quality of processes or systems. Unfortunately, with the exponential growth in data, users often have difficulty in visualizing the often-unstructured, non-homogeneous data coming from a variety of sources. The recent growth in popularity of 3D printing has ushered in a revolutionary way to interact with big data. Using a 3D printed mockup up a physical or notional environment, one can display data on the mockup to show real-time data patterns. In this poster and demonstration, we describe the process of 3D printing and demonstrate an application of displaying Twitter data on a 3D mockup of the Massachusetts Institute of Technology (MIT) campus, known as LuminoCity.
READ LESS

Summary

Big data volume continues to grow at unprecedented rates. One of the key features that makes big data valuable is the promise to find unknown patterns or correlations that may be able to improve the quality of processes or systems. Unfortunately, with the exponential growth in data, users often have...

READ MORE
Using 3D printing to visualize social media big data

LuminoCity: a 3D printed, illuminated city generated from LADAR data

April 14, 2014
  |
Conference Paper
Author:
Matthew R Fetterman
…
Published in:
TePRA 2014: IEEE Int. Conf. on Tech. for Practical Robot Appl., 14-15 April 2014.
Topic:
ladar
R&D area:
R&D group:

Summary

In this work, we describe LuminoCity, a novel three-dimensional data display. A 3D printed model of Cambridge, MA was generated from LADAR data. A translucent plastic model was then cast from a mold of the 3D printed model. We developed a display system to project data onto the translucent model, and we can project a wide range of analyses onto the city, including satellite imagery and network traffic.
READ LESS

Summary

In this work, we describe LuminoCity, a novel three-dimensional data display. A 3D printed model of Cambridge, MA was generated from LADAR data. A translucent plastic model was then cast from a mold of the 3D printed model. We developed a display system to project data onto the translucent model...

READ MORE
LuminoCity: a 3D printed, illuminated city generated from LADAR data

Distributed multi-modal sensor system for searching a foliage-covered region

April 28, 2011
  |
Conference Paper
Author:
Matthew R Fetterman
…
Published in:
2011 IEEE Conf. on Technologies for Practical Robot Applications (TePRA), 28 April 2011, pp. 7-14.
Topic:
sensors
R&D area:
R&D group:

Summary

We designed and constructed a system that includes aircraft, ground vehicles, and throwable sensors to search a semiforested region that was partially covered by foliage. The system contained 4 radio-controlled (RC) trucks, 2 aircraft, and 30 SensorMotes (throwable sensors). We also investigated communications links, search strategies, and system architecture. Our system is designed to be low-cost, contain a variety of sensors, and distributed so that the system is robust even if individual components are lost.
READ LESS

Summary

We designed and constructed a system that includes aircraft, ground vehicles, and throwable sensors to search a semiforested region that was partially covered by foliage. The system contained 4 radio-controlled (RC) trucks, 2 aircraft, and 30 SensorMotes (throwable sensors). We also investigated communications links, search strategies, and system architecture. Our...

READ MORE
Distributed multi-modal sensor system for searching a foliage-covered region
1-3 of 3