Publications
MEMS microswitches for reconfigurable microwave circuitry
March 1, 2001
Journal Article
Published in:
IEEE Microw. Wirel. Compon. Lett., Vol. 11, No. 3, March 2001, pp. 106-108.
Topic:
Summary
The performance is reported for a new microelectromechanical structure (MEMS) cantilever microswitch. We report on both dc- and capacitively-contacted microswitches. The dc-contacted microswitches have contact resistance of less than 1 ohm, and the RF loss of the switch up to 40 GHz in the closed position is 0.1-0.2 dB. Capacitively-contacted switches have an impedance ratio of 141:1 from the open to closed state and in the closed position have a series capacitance of 1.2 pF. The capacitively-contacted switches have been measured up to 40 GHz with S(21) less than -0.7 dB across the 5-40 GHz band.
Summary
The performance is reported for a new microelectromechanical structure (MEMS) cantilever microswitch. We report on both dc- and capacitively-contacted microswitches. The dc-contacted microswitches have contact resistance of less than 1 ohm, and the RF loss of the switch up to 40 GHz in the closed position is 0.1-0.2 dB. Capacitively-contacted...
READ MORE
MEMs microswitch arrays for reconfigurable distributed microwave components
July 16, 2000
Conference Paper
Published in:
IEEE Antennas and Propagation Society Int. Symp. Digest, Vol. 2, 16-21 July 2000, pp. 587-591.
Topic:
Summary
A revolutionary device technology and circuit concept is introduced for a new class of reconfigurable microwave circuits and antennas. The underlying mechanism is a compact MEMs cantilever microswitch that is arrayed in two-dimensions. The switches have the ability to be individually actuated. By constructing distributed circuit components from an array, the individual addressability of the microswitch provides the means to reconfigure the circuit trace and, thus, provides the ability to either fine-tune or completely reconfigure the circuit element's behavior. Device performance can be reconfigured over a decade in bandwidth in the nominal frequency range of 1 to 100 GHz. In addition, other circuit-element attributes can be reconfigured such as instantaneous bandwidth, impedance, and polarization (for antennas). This will enable the development of next-generation communication, radar and surveillance systems with agiIity to reconfigure operation for diverse operating bands, modes, power levels, and waveforms.
Summary
A revolutionary device technology and circuit concept is introduced for a new class of reconfigurable microwave circuits and antennas. The underlying mechanism is a compact MEMs cantilever microswitch that is arrayed in two-dimensions. The switches have the ability to be individually actuated. By constructing distributed circuit components from an array...
READ MORE