Publications

Refine Results

(Filters Applied) Clear All

Airborne radars for surveillance and weapon delivery

July 15, 1977
  |
Technical Report
Author:
Charles E. Muehe
Published in:
MIT Lincoln Laboratory Report TN-1977-23
Topic:
airborne surveillance
R&D area:
R&D group:

Summary

Airborne radars such as AW ACS capable of large area surveillance of aircraft over both land and sea have become a reality in the past few years. Soon to follow are radars capable of large area surveillance of moving ground traffic. Through their ability to accurately report enemy movement and to target individual enemy ground vehicles, these radars will undoubtedly have a large impact on intelligence gathering, resource allocation, command, control and the damage assessment functions. This report describes relationships and trade-offs fundamental in the design of airborne surveillance radars in various operational roles. It describes radar capabilities which can be achieved using modern technology including array antennas, advanced waveforms and advanced signal processing techniques.
READ LESS

Summary

Airborne radars such as AW ACS capable of large area surveillance of aircraft over both land and sea have become a reality in the past few years. Soon to follow are radars capable of large area surveillance of moving ground traffic. Through their ability to accurately report enemy movement and...

READ MORE
Airborne radars for surveillance and weapon delivery

Coaxial magnetron spectra and instabilities

June 24, 1977
  |
Project Report
Author:
Melvin Labitt
Published in:
MIT Lincoln Laboratory Report ATC-74
Topic:
surveillance
R&D area:
R&D group:

Summary

Application of advanced radar clutter rejection techniques to FAA airport surveillance and enroute radars is constrained by inherent instabilities and spectral properties of the device used with the radar transmitter to generate high level RF pulse energy, and the degree to which its spectrum can be influenced by the circuit in which it operates. Coaxial magnetrons are believed to be spectrally pure, controllable and stable, and to embody other characteristics such as long life, which make them attractive replacements for the magnetrons presently employed. This report summarizes the results of extensive measurements made on a conventional S-band magnetron (presently employed in the ASR-7 radar) and a coaxial magnetron of equivalent pulse and power rating to compare their instabilities and spectral properties.
READ LESS

Summary

Application of advanced radar clutter rejection techniques to FAA airport surveillance and enroute radars is constrained by inherent instabilities and spectral properties of the device used with the radar transmitter to generate high level RF pulse energy, and the degree to which its spectrum can be influenced by the circuit...

READ MORE
Coaxial magnetron spectra and instabilities

Advanced signal processing for airport surveillance radars

June 11, 1977
  |
Conference Paper
Author:
Lincoln Cartledge
…
Published in:
IEEE Electronics and Aerospace Systems Convention, EASCON, 7-9 October 1974.
Topic:
air traffic control
R&D area:
R&D group:

Summary

The inclusion of airport surveillance radars (ASR) in an automated air traffic control system, such as the ARTS-III, has been limited by the present radar's capability to automatically reject ground clutter, weather clutter and angels while still maintaining good detectability on all aircraft within their coverage patterns. Analytical and experimental studies have been performed which indicate that new techniques can significantly enhance the automated capability of these radars. A special-purpose, hard-wired, digital signal processor has been designed, built and tested which provides near-optimum target detection over the entire ASR coverage out to 48 nmi. The processor which coherently integrates eight pulses has both a fine grained clutter map for optimal thresholding in high ground clutter environments and a mean-level thresholding scheme for filtering those Doppler cells which contain heavy precipitation. Because of the processor's ability to detect targets in a high ground clutter environment, the ASR's will be able to operate their antennas at lower elevation angles and, thus, have better coverage of low flying aircraft near the terminal. The processor is initially being tested on a highly modified, coherent S-band, FPR-18 radar. The stability of the klystron transmitter was improved so that it would not limit system performance and a new, wide dynamic range, linear receiver was provided.
READ LESS

Summary

The inclusion of airport surveillance radars (ASR) in an automated air traffic control system, such as the ARTS-III, has been limited by the present radar's capability to automatically reject ground clutter, weather clutter and angels while still maintaining good detectability on all aircraft within their coverage patterns. Analytical and experimental...

READ MORE
Advanced signal processing for airport surveillance radars

Effects of RF power deviations on BCAS link reliability

June 7, 1977
  |
Project Report
Author:
William H. Harman III
Published in:
MIT Lincoln Laboratory Report ATC-76
Topic:
surveillance
R&D area:
R&D group:

Summary

In the design of BCAS there is some freedom in the choice of specifications for BCAS transmitter power and receiver MTL (Minimum Triggering Level). Transmitter power should be high enough to provide adequate link reliability while being low enough to prevent interference problems. The question of providing adequate link reliability for the DABS mode of BCAS is addressed in this study. The study makes use of aircraft antenna gain data resulting from a model measurement program, and is otherwise analytical. It is concluded that appropriate nominal design values are transmitter power = 500 watts and receiver MTL = -77 dBm (referred to the BCAS unit). It is shown that these values provide sufficient power margin, at the air-to-air ranges appropriate for BCAS, so as to allow for adverse power deviations that might result from aircraft antenna gains, antenna cabling, and the expected transmitter and receiver deviations due to manufacturing nonuniformities and aging.
READ LESS

Summary

In the design of BCAS there is some freedom in the choice of specifications for BCAS transmitter power and receiver MTL (Minimum Triggering Level). Transmitter power should be high enough to provide adequate link reliability while being low enough to prevent interference problems. The question of providing adequate link reliability...

READ MORE
Effects of RF power deviations on BCAS link reliability

Comparison of the performance of the moving target detector and the radar video digitizer

April 26, 1977
  |
Project Report
Author:
Robert M. O'Donnell
…
Published in:
MIT Lincoln Laboratory Report ATC-70
Topic:
surveillance
R&D area:
R&D group:

Summary

Results of side by side simultaneous tests to compare the performance of the Moving Target Detector (MID) digital signal processor and that of a newly developed adaptive sliding window detector, the Radar Video Digitizer (RVD-4), are described. The MTD, used with a highly modified FPS-18, employs coherent linear doppler filtering, adaptive thresholding, and a fine grained clutter map which together reject all forms of clutter simultaneously. The RVD-4, which was used with an ASR-7, is a non-linear, non-coherent digital processor. The detection and false alarm performance of both processors in thermal noise was identical. Measured detection and sub-clutter visibility performance of the MTD on controlled aircraft flying in heavy rain, in heavy ground clutter, and at near-zero radial velocity is shown to be superior to that of the RVD-4. MID report data is also shown to be more accurate than the RVD-4 data resulting in improved ARTS-Ill tracker performance when using MID processed data.
READ LESS

Summary

Results of side by side simultaneous tests to compare the performance of the Moving Target Detector (MID) digital signal processor and that of a newly developed adaptive sliding window detector, the Radar Video Digitizer (RVD-4), are described. The MTD, used with a highly modified FPS-18, employs coherent linear doppler filtering...

READ MORE
Comparison of the performance of the moving target detector and the radar video digitizer

Air-to-air visual acquisition performance with Pilot Warning Instruments (PWI)

April 25, 1977
  |
Project Report
Author:
John W. Andrews
Published in:
MIT Lincoln Laboratory Report ATC-73
Topic:
surveillance
R&D area:
R&D group:

Summary

Subject pilot flight tests conducted at the M.I.T. Lincoln Laboratory have produced new data characterizing the ability of general aviation pilots to visually acquire portential collision hazards when aided by Pilot Warning Instruments (PWI). In this paper major issues in the design of Pilot Warning Instruments are reviewed. Visual acquisition performance is described in terms of a non-homogeneous Poisson process and results of previous experiments are reinterpreted in this light. It is shown that the major test results can be explained in terms of an acquisition rate which is proportional to the solid angle subtended by the target. Model parameters appropriate for Lincoln Laboratory flight test data are derived by maximum likelihood techniques. A statistical analysis of significance is performed for other factors which are not explicitly included in this model. Performance predictions for a wide variety of aircraft sizes, approach speeds, and visibility conditions are presented.
READ LESS

Summary

Subject pilot flight tests conducted at the M.I.T. Lincoln Laboratory have produced new data characterizing the ability of general aviation pilots to visually acquire portential collision hazards when aided by Pilot Warning Instruments (PWI). In this paper major issues in the design of Pilot Warning Instruments are reviewed. Visual acquisition...

READ MORE
Air-to-air visual acquisition performance with Pilot Warning Instruments (PWI)

Description and performance evaluation of the moving target detector

March 8, 1977
  |
Project Report
Author:
Lincoln Cartledge
…
Published in:
MIT Lincoln Laboratory Report ATC-69
Topic:
surveillance
R&D area:
R&D group:

Summary

Under FAA sponsorship, MIT, Lincoln Laboratory has developed new techniques which significantly enhance automated aircraft detection in all forms of clutter. These techniques are embodied in a digital signal processor called the Moving Target Detector (MTD). This processor has been integrated into the ARTS-III system at the National Aviation Facilities Experimental Center, Atlantic City, New Jersey (NAFEC) and has undergone testing during the summer of 1975. This report contains a description of the MTD design and its evaluation tests. A detailed discussion of the significance of the results is also presented. The detection performance of the MTD was excellent in the clear, in rain and ground clutter, and false alarms were under complete control. The MTD processed range and azimuth data was very accurate, and the MTJI did not suffer from track dropouts as did the conventional MTI when the aircraft track became tangential to the radar. Performance was excellent on magnetron as well as klystron-type radars with the exception- of second-time-around clutter cancellation.
READ LESS

Summary

Under FAA sponsorship, MIT, Lincoln Laboratory has developed new techniques which significantly enhance automated aircraft detection in all forms of clutter. These techniques are embodied in a digital signal processor called the Moving Target Detector (MTD). This processor has been integrated into the ARTS-III system at the National Aviation Facilities...

READ MORE
Description and performance evaluation of the moving target detector

DABS monopulse summary

February 4, 1977
  |
Project Report
Author:
David Karp
…
Published in:
MIT Lincoln Laboratory Report ATC-72
Topic:
surveillance
R&D area:
R&D group:

Summary

Improved azimuthal resolution of proximate aircraft necessary to support ATC automation can be achieved by beacon surveillance systems employing monopulse angle estimation techniques described in this report. Included in the report are the results of beacon surveillance monopulse system analyses relating to off-boresight angle estimation using short (1/2 micro sec) pulses: the effects of specular and diffuse multipath signal return; the effects of overlapping ATCRBS fruit replies, and the problems of antenna pattern design. These topics have been studied in detail as part of the Lincoln Laboratory disign of the Discrete Address Beacon System (DABS). This report summarizes analytical results obtained. In general, it has been concluded that the ATC environment does not pose a serious problem to the use of the monopulse concept for beacon system direction finding and that sufficient direction finding accuracy can be obtained using a small number of narrow pulses for each scan.
READ LESS

Summary

Improved azimuthal resolution of proximate aircraft necessary to support ATC automation can be achieved by beacon surveillance systems employing monopulse angle estimation techniques described in this report. Included in the report are the results of beacon surveillance monopulse system analyses relating to off-boresight angle estimation using short (1/2 micro sec)...

READ MORE
DABS monopulse summary

Ionospheric scintillation

February 1, 1977
  |
Journal Article
Author:
Robert K. Crane
Published in:
Proc. of the IEEE, Vol. 65, No. 2, February 1977, pp. 180-199.
Topic:
radar
R&D area:
R&D group:

Summary

Available observations of ionospheric scintillation are analyzed to evaluate the adequacy of existing models used for the interpretation of scintillation data. The theoretical models are reviewed and the frequency and propagation geometry dependences predicted by the models are compared with the observations. The models were used to construct scintillation occurrence distribution functions which show that scintillation phenomena significantly affect the design of transionospheric radar or communication systems operating at frequencies below 1 GHz. Diversity schemes useful for mitigation of scintillation effects are considered. Mention is made of the geophysical processes thought to be responsible for scintillation.
READ LESS

Summary

Available observations of ionospheric scintillation are analyzed to evaluate the adequacy of existing models used for the interpretation of scintillation data. The theoretical models are reviewed and the frequency and propagation geometry dependences predicted by the models are compared with the observations. The models were used to construct scintillation occurrence...

READ MORE
Ionospheric scintillation

ATCRBS mode of DABS

January 31, 1977
  |
Project Report
Author:
Jeffrey L. Gertz
Published in:
MIT Lincoln Laboratory Report ATC-65
Topic:
surveillance
R&D area:
R&D group:

Summary

The Discrete Address Beacon System (DABS) has been designed to be an evolutionary replacement oth the third generation Air Traffic Control Radar Beacon System (ATCRBS). Although the ATCRBS returns processed by DABS will be identical to those currently being employed, the DABS processing system will not merely mimic the present system. Instead, it has been designed to surpass current performance levels even while reducing the number of interrogations transmitted per scan. This will be made possible by utilizing the availability of several new features introduced by the DABS sensor. In particular, the employment of monopulse antenna will permit both more accurate azimuth estimation with fewer replies per scan and improved decoding performance when garble is present. The ATCRBS portion of the DABS sensor has been designed to be a complete, self-contained package that performs all ATCRBS functions required for aircraft surveillance. The major tasks it implements are: 1. Determining the range, azimuth, and code of each received ATCRBS reply 2. Grouping replies from the same aircraft into target reports and discarding fruit replies 3. Identifying all false alarm target reports due to reflections, coincident fruit, splitting, or ringaround 4. Initiating and maintaining a track on all aircraft in the covered airspace The first function has been implemented in hardware while the remaining ones are performed in software. This report will discuss in detail only the software subsystems. The ATCRBS system described in this report has been implemented in the ATCRBS Monopulse Processing System (AMPS) built at Lincoln Laboratory. Although the AMPS design is based upon the specifications contained in the DABS Engineering Requirements (ER), there are two major differences between AMPS and the ER system. First, the design described here is for a standalone ATCRBS system; no capabilities are built in to send, receive, or employ information from other sensors, and no formal interfaces to other ATC functions are defined. Second, this system was not intended to be a production prototype, so no reliability features have been included.
READ LESS

Summary

The Discrete Address Beacon System (DABS) has been designed to be an evolutionary replacement oth the third generation Air Traffic Control Radar Beacon System (ATCRBS). Although the ATCRBS returns processed by DABS will be identical to those currently being employed, the DABS processing system will not merely mimic the present...

READ MORE
ATCRBS mode of DABS
2181-2190 of 2318