Publications

To enable development of novel signal processing circuits, a high-speed surface-channel charge coupled device (CCD) process has been co-integrated with the Lincoln Laboratory 180-nm RF fully depleted silicon-on-insulator (FDSOI) CMOS technology. The CCDs support charge transfer clock speeds in excess of 1 GHz while maintaining high charge transfer efficiency (CTE). Both the CCD and CMOS gates are formed using a single-poly process, with CCD gates isolated by a narrow phase-shift-defined gap. CTE is strongly dependent on tight control of the gap critical dimension (CD). In this paper we review the tradeoffs encountered in the co-integration of the CCD and CMOS technologies. The effect of partial coherence on gap resolution and pattern fidelity is discussed. The impact of asymmetric bias due to phase error and phase shift mask (PSM) sidewall effects is presented, along with adopted mitigation strategies. Issues relating to CMOS pattern fidelity and CD control in the double patterning process are also discussed. Since some signal processing CCD structures involve two-dimensional transfer paths, many required geometries present phase compliance and trim engineering challenges. Approaches for implementing noncompliant geometries, such as T shapes, are described, and the impact of various techniques on electrical performance is discussed.

We have developed a merged CCD/SOI-CMOS technology that enables the fabrication of monolithic, low-power imaging systems on a chip. The CCD's, fabricated in the bulk handle wafer, have charge-transfer inefficiencies of about 1x10(-5) and well capacities of more than 100,000 electrons with 3.3-V clocks and 8x8um pixels. Fully depleted 0.35pm SOI-CMOS ring oscillators have stage delay of 48ps at 3.3V. We demonstrate for the first time an integrated image sensor with charge-domain A/D conversion and on-chip clocking.