Publications

Refine Results

(Filters Applied) Clear All

Tagged As

Measurements of the 1030 and 1090 MHz environments at JFK International Airport

September 12, 2012
  |
Project Report
Author:
Adam Panken
…
Published in:
MIT Lincoln Laboratory Report ATC-390
Topic:
mode S data links
R&D area:
R&D group:

Summary

Measurements of signals in the 1030 and 1090 MHz frequency bands have been made by MIT Lincoln Laboratory in the last several years, previously in the Boston area and most recently in April 2011, at JFK International Airport near New York City. This JFK measurement activity was performed as a part of the Lincoln Laboratory Traffic Alert and Collision Avoidance System (TCAS) work for the Federal Aviation Administration (FAA) and is the subject of this report. This report includes: 1) Overall characteristics of the 1030/1090 MHz environments, 2) Analysis of the TCAS air-to-air coordination process, 3) Examination of 1090 MHz Extended Squitter transmissions for use in TCAS, 4) Assessment of the extent and impact of TCAS operation on the airport surface.
READ LESS

Summary

Measurements of signals in the 1030 and 1090 MHz frequency bands have been made by MIT Lincoln Laboratory in the last several years, previously in the Boston area and most recently in April 2011, at JFK International Airport near New York City. This JFK measurement activity was performed as a...

READ MORE
Measurements of the 1030 and 1090 MHz environments at JFK International Airport

Lincoln Laboratory 1030/1090 MHz monitoring, March-June 2010

November 15, 2011
  |
Project Report
Author:
Barbara J. Chludzinski
…
Published in:
MIT Lincoln Laboratory Report ATC-372
Topic:
mode S data links
R&D area:
R&D group:

Summary

Traffic Alert and Collision Avoidance System (TCAS) behavior in New England airspace is being monitored and analyzed, making use of an omni-directional 1030/1090 MHz receiver. The receiver system, located in Lexington, Massachusetts, and operated by MIT Lincoln Laboratory, is used to record data for subsequent analysis in non-real-time. This is the second report of MIT Lincoln Laboratory 1030/1090 MHz monitoring, covering the period March through June 2010. There are three main areas of study: 1. 1030 MHz data related to TCAS air-to-air coordination and other communications, 2. 1030 and 1090 MHz data related to TCAS surveillance, and 3. 1090 MHZ Extended Squitter data, i.e., the Mode S implementation of Automatic Dependent Surveillance-Broadcast (ADS-B). In addition to a summary of results, this report answers specific questions raised during the previous 2009 analysis and attempts to provide insights into the meaning of the data with respect to TCAS operation. This four-month period will be used to baseline 1030/1090 MHz activity in the New England area. Future plans call for the 1030/1090 MHz receiver to be moved so that limited data recording can be performed at various TCAS RA monitoring system (TRAMS) sites throughout the NAS.
READ LESS

Summary

Traffic Alert and Collision Avoidance System (TCAS) behavior in New England airspace is being monitored and analyzed, making use of an omni-directional 1030/1090 MHz receiver. The receiver system, located in Lexington, Massachusetts, and operated by MIT Lincoln Laboratory, is used to record data for subsequent analysis in non-real-time. This is...

READ MORE
Lincoln Laboratory 1030/1090 MHz monitoring, March-June 2010

Guidance material for Mode S-specific protocol application avionics

June 4, 2007
  |
Project Report
Author:
Robert D. Grappel
…
Published in:
MIT Lincoln Laboratory Report ATC-334
Topic:
mode S data links
R&D area:
R&D group:

Summary

This ATC report presents guidance material for the use of "Ground-Initiated Comm. B" (GICB) register set contained in a Mode S transponder. The guidance material is intended to provide assistance for implementers of Mode S avionics installations. A common summary of the requirements and specifications for Mode S GICB transponder register data link applications is developed. While this ATC report focuses primarily on the "Elementary Surveillance" (ELS), "Enhanced Surveillance" (EHS), and "Automatic Dependent Surveillance-Broadcast" (ADS-B) applications, guidance information is also provided for general transponder configuration and architecture of other Mode S functions employing the GICB register set. Although the information contained in this ATC report is drawn from a number of approved national and international standards, it is not intended to replace or supersede those standards documents. In the event of a conflict or contradiction between this ATC report and any approved standards (see references 1 through 6), the approved standard takes precedence and the reader is encouraged to contact the authors of this document. Reference 4 is the most-recent and complete specification for the Mode S register contents. For ease of reference, the relevant Mode S register images have been duplicated in Appendix A of this report.
READ LESS

Summary

This ATC report presents guidance material for the use of "Ground-Initiated Comm. B" (GICB) register set contained in a Mode S transponder. The guidance material is intended to provide assistance for implementers of Mode S avionics installations. A common summary of the requirements and specifications for Mode S GICB transponder...

READ MORE
Guidance material for Mode S-specific protocol application avionics

Operational and spectrum tests for ATIDS at Dallas/Fort Worth Airport

September 20, 1999
  |
Project Report
Author:
M. Loren Wood Jr
Published in:
MIT Lincoln Laboratory Report ATC-272
Topic:
mode S data links
R&D area:
R&D group:

Summary

Runway Incursion (RI) prevention is on the National Transportation Safety Board's (NTSB) list of "10 Most Wanted" safety improvements. Improved surveillance on the airport surface is an important ingredient in that it improves situational awareness and improves the accuracy of tracks used by automation algorithms. Towards this goal, the Runway Incursion Reduction Program (RIRP) has been developing the Airport Target Identification System (ATIDS). ATIDS is a prototype multilateration and Automatic Dependent Surveillance - Broadcast (ADS-B) system. It requires the enabling of existing transponders on the airport surface....The RIRP team, which includes the FAA Volpe National Transportation Systems Center, Massachusetts Institute of Technology Lincoln Laboratory (MIT/LL) and Trios Associates, Inc., has conducted interferences tests at Dallas/Fort Worth Airport (DFW) to quantify the impact that ATIDS would have on that high-use environment. The tests included environmental 1040/1090 MHz measurements, ATCRBS false target investigations, and Mode S interrogation tests. This document reports the results of these tests. [Not complete].
READ LESS

Summary

Runway Incursion (RI) prevention is on the National Transportation Safety Board's (NTSB) list of "10 Most Wanted" safety improvements. Improved surveillance on the airport surface is an important ingredient in that it improves situational awareness and improves the accuracy of tracks used by automation algorithms. Towards this goal, the Runway...

READ MORE
Operational and spectrum tests for ATIDS at Dallas/Fort Worth Airport

Airport surface surveillance using differential GPS and the Mode S data link

June 6, 1994
  |
Conference Paper
Author:
Robert E. Boisvert
…
Published in:
Proc. 50th Annual Mtg. of the Institute of Navigation, 6-8 June 1994, pp. 335-344.
Topic:
GPS
R&D area:
R&D group:

Summary

A new concept for providing surface surveillance of aircraft and ground vehicles has recently been tested at Hanscom Field in Bedford, Massachusetts. This concept, known as GPS-Squitter, combines the capabilities of differential GPS for navigation with those of the Mode S data link for communications. Together these systems provide accurate surveillance data along with a positive identification of surface traffic, both very important for an effective surface meillance system. The GPS-Squitter concept is based on the use of the Mode S squitter. The current squitter is a 56bit Mode S all-call reply message spontaneously broadcast by all aircraft Mode S transponders at a 1Hz rate. This message provides the unique Mode S address of an aircrsft and is used by TCAS (Traffic Alert and Collision Avoidance System) for acquisition of nearby aircraft. In the Hanscom testing, this squitter was extended to include GPS-based surveillance information. Two target vehicles participated in the experiments - one aircraft and one ground vehicle. They determined their position, heading, and speed using differential GPS and automatically broadcast that surveillance information to ground transmit/receive stations using the modified squitter. Differential GPS pseudorange and pseudorange rate corrections were formed by a reference station located at Hanscom Field and were transmitted by the ground transmit receive stations to the target vehicles. This paper describes the configuration of the target vehicles, the ground transmit/receive stations, and the differential GPS reference station. Results of the surface surveillance testing are provided including: system coverage, surveillance update rate, and differential GPS data quality. Ongoing testing at Logan International Airport is also discussed.
READ LESS

Summary

A new concept for providing surface surveillance of aircraft and ground vehicles has recently been tested at Hanscom Field in Bedford, Massachusetts. This concept, known as GPS-Squitter, combines the capabilities of differential GPS for navigation with those of the Mode S data link for communications. Together these systems provide accurate...

READ MORE
Airport surface surveillance using differential GPS and the Mode S data link

ADS-Mode S

October 24, 1993
  |
Conference Paper
Author:
George H. Knittel
…
Published in:
Proc. 38th Annual Air Traffic Control Association Convention, 24-28 October 1993, pp. 230-236.
Topic:
air traffic control
R&D area:
R&D group:

Summary

The International Civil Aviation Organization (ICAO) has defined a concept for communications, navigation, and surveillance for the next century known as the Future Air Navigation System (FANS). A cornerstone, of the FANS is an increasing reliance on satellite-based position-determining systems such as the Global Positioning System (GPS). In the case of, surveillance, aircraft position information is automatically downlinked to ground controllers. This technique is known as Automatic Dependent Surveillance (ADS). ADS-Mode S is an ADS system concept utilizing the frequencies and formats of the Mode S system for downlinking position information and also uplinking differential GPS (DGPS) corrections. The result is an integrated concept for surveillance that permits aircraft equipped with a Mode S transponder and a GPS receiver to participate in both ADS and beacon ground environments. This makes possible a smooth transition of the National Airspace System (NAS) secondary surveillance system from a beacon-based to an ADS-based environment. In addition, several other benefits from ADS-Mode S accrue to the Traffic Alert and Collision Avoidance System (TCAS) and to the Mode S Data Link system.
READ LESS

Summary

The International Civil Aviation Organization (ICAO) has defined a concept for communications, navigation, and surveillance for the next century known as the Future Air Navigation System (FANS). A cornerstone, of the FANS is an increasing reliance on satellite-based position-determining systems such as the Global Positioning System (GPS). In the case...

READ MORE
ADS-Mode S

ADS-Mode S: Initial System Description

April 2, 1993
  |
Project Report
Author:
Vincent A. Orlando
Published in:
MIT Lincoln Laboratory Report ATC-200
Topic:
mode S data links
R&D area:
R&D group:

Summary

Dependent Surveillance and the Mode S beacon radar. The result is an integrated concept for seamless surveillance and data link that permita equipped aircraft to participate in ADS or beacon ground environmenta. This offers many possibilities for transition from a beacon to an ADS based environment. The ADS-Mode S concept in baaed on use of the Mode S squitter. The Mode S squitter is a spontaneous, periodic (once per second) 56-bit Mode S broadcast containing the Mode S 24-bit address. This broadcast is provided by all Mode S transponders and in used by the Traffic Alert and Collision Avoidance System (TCAS) to acquire Mode S equipped aircraft. For ADS-Mode S use, this squitter broadcast is extended to 112 bits to provide for the transmission of a 56-bit ABS message field. The ADS squitter is transmitted in addition to the current TCAS squitter in order to maintain compatibility with current TCAS equipment. This paper defines the ADS-Mode S concept, describes its principal surveillance and data link applications and provides estimates of expected performance.
READ LESS

Summary

Dependent Surveillance and the Mode S beacon radar. The result is an integrated concept for seamless surveillance and data link that permita equipped aircraft to participate in ADS or beacon ground environmenta. This offers many possibilities for transition from a beacon to an ADS based environment. The ADS-Mode S concept...

READ MORE
ADS-Mode S: Initial System Description

Mode S Beacon System: a functional overview

August 29, 1989
  |
Project Report
Author:
Vincent A. Orlando
Published in:
MIT Lincoln Laboratory Report ATC-150
Topic:
mode S data links
R&D area:
R&D group:

Summary

This document provides a functional overview of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current ATC beacon system, and may be implemented over an extended transition period. Mode S will provide the surveillance and communication performance required by ATC automation, the reliable communications needed to support data link services, and the capability of operating with a terminal or enroute, radar digitizer-equipped, ATC surveillance radar. The material contained in this document serves as an introduction to the more detailed information contained in "Mode S Beacon System: Functional Description." DOT/FAA/PM-86/19, 29 August 1986.
READ LESS

Summary

This document provides a functional overview of the Mode S Beacon System, a combined secondary surveillance radar (beacon) and ground-air-ground data link system capable of providing the aircraft surveillance and communications necessary to support ATC automation in future traffic environments. Mode S is capable of common-channel interoperation with the current...

READ MORE
Mode S Beacon System: a functional overview

Propagation of mode S beacon signals on the airport surface

January 1, 1989
  |
Journal Article
Author:
M. Loren Wood Jr
Published in:
Lincoln Laboratory Journal, Vol. 2, No. 3, Fall 1989, pp. 397-410.
Topic:
air traffic control
R&D area:
R&D group:

Summary

Many airports across the United States will soon be equipped with Mode S, a next generation beacon (or secondary) radar system. One feature of Mode S is that it provides a data link between airborne aircraft and air traffic controllers. If Mode S could be used to communicate with aircraft on the airport surface, the radar system would improve airport safety and efficiency on runways and taxiways. The airport surface, however, is a hostile propagation environment. This article outlines a candidate design for the propagation of Mode-S beacon signals on the airport surface. Data that support the feasibility of Mode S for surveilling runways and taxiways are presented.
READ LESS

Summary

Many airports across the United States will soon be equipped with Mode S, a next generation beacon (or secondary) radar system. One feature of Mode S is that it provides a data link between airborne aircraft and air traffic controllers. If Mode S could be used to communicate with aircraft...

READ MORE
Propagation of mode S beacon signals on the airport surface

The mode S beacon radar system

January 1, 1989
  |
Journal Article
Author:
Vincent A. Orlando
Published in:
Lincoln Laboratory Journal, Vol. 2, No. 3, Fall 1989, pp. 345-362.
Topic:
air traffic control
R&D area:
R&D group:

Summary

Air traffic controllers rely on primary and secondary radars to locate and identify aircraft. Secondary, or beacon, radars require aircraft to carry devices called transponders that enhance surveillance echoes and provide data links. Airports currently use a secondary-radar system known as the Air Traffic Control Radar Beacon System (ATCRBS). However, ATCRBS has limitations in dense-traffic conditions, and the system's air-to-ground data link is limited. In response to these shortcomings, Lincoln Laboratory has developed the Mode Select Beacon System (referred to as Mode S), a next-generation system that extensive laboratory and field testing has validated. In addition to significant surveillance improvements, Mode S provides the general-purpose ground-air-ground data link necessary to support the future automation of air traffic control (ATC). The Federal Aviation Administration (FAA) is currently installing the system with initial operation scheduled for 1991.
READ LESS

Summary

Air traffic controllers rely on primary and secondary radars to locate and identify aircraft. Secondary, or beacon, radars require aircraft to carry devices called transponders that enhance surveillance echoes and provide data links. Airports currently use a secondary-radar system known as the Air Traffic Control Radar Beacon System (ATCRBS). However...

READ MORE
The mode S beacon radar system
1-10 of 20