Publications

Refine Results

(Filters Applied) Clear All

Advances in radar signal processing

May 14, 1976
  |
Conference Paper
Author:
Charles E. Muehe
Published in:
Electro/76, 11-14 May 1976.
Topic:
radar
R&D area:
R&D group:

Summary

The recent availability of new solid-state digital components has made possible the development of radar signal processing techniques only dreamed of in the past. The philosophy and design of these techniques is described in terms of a new signal processor for Airport Surveillance Radars called the Moving Target Detector (MTD). Test results showing greatly improved automatic aircraft acquisition and tracking are discussed.
READ LESS

Summary

The recent availability of new solid-state digital components has made possible the development of radar signal processing techniques only dreamed of in the past. The philosophy and design of these techniques is described in terms of a new signal processor for Airport Surveillance Radars called the Moving Target Detector (MTD)...

READ MORE
Advances in radar signal processing

Spectra of ionospheric scintillation

May 1, 1976
  |
Journal Article
Author:
Robert K. Crane
Published in:
J. Geophys. Res., Vol. 81, No. 13, 1 May 1976, pp. 2041-2050.
Topic:
radar
R&D area:
R&D group:

Summary

Observation of amplitude and phase scintillation were made at the Millstone Hill radar facility by using phase coherent sources at 150 and 400 MHz on the U.S. Navy navigation system satellites. These observations have been processed to yield power spectra of the fluctuations in the logarithm of the received power (log power) at each frequency and the calculations in phase path length difference (differential phase) between the two frequencies. A theoretical analysis was performed to predict the log power and differential phase power spectra. The theoretical model was based upon weak scatter theory for a thick screen with a three-dimensional power law power spectrum representation for the electron density fluctuations. A -4 exponent for the power law best fit the observed spectra. For weak scintillation (rms fluctuations in log power less than 5 dB or S4 < 0.9) the theroretical calculations were in excellent agreement with the observations. For strong scintillation, saturation was observed, and the measured spectra were broader than those predicted on the basis of weak scatter theory. An increase in electron density fluctuations relative to the value predicted by the power law model was observed at scale sizes smaller than 0.8 km.This increase may be responsible for the anomalous scintillation observations at gigahertz frequencies.
READ LESS

Summary

Observation of amplitude and phase scintillation were made at the Millstone Hill radar facility by using phase coherent sources at 150 and 400 MHz on the U.S. Navy navigation system satellites. These observations have been processed to yield power spectra of the fluctuations in the logarithm of the received power...

READ MORE
Spectra of ionospheric scintillation

DABS sensor interactions with ATC facilities

April 22, 1976
  |
Project Report
Author:
David Reiner
…
Published in:
MIT Lincoln Laboratory Report ATC-51
Topic:
surveillance
R&D area:
R&D group:

Summary

This document presents, on a functional level, the interactions that occur between a DABS sensor and an ATC facility (terminal or enroute) in order to make full use of the capabilities provided by the addition of DABS sensors to the ATC system. There are three functions of the interactions: (1) handle surveillance reports from the DABS site, (2) handle the two-way digital communications messages between pilots and controllers, and (3) handle a variety of control data messages between the two sites. For each kind of interaction, the actions taken by the DABS sensor are summerized, the messages involved in the transaction are defined, and suggestions are made concerning possible appropriate actions by the ATC facility. The latter include message generation and display, data processing, and controller and system manager activities.
READ LESS

Summary

This document presents, on a functional level, the interactions that occur between a DABS sensor and an ATC facility (terminal or enroute) in order to make full use of the capabilities provided by the addition of DABS sensors to the ATC system. There are three functions of the interactions: (1)...

READ MORE
DABS sensor interactions with ATC facilities

Concept and plan for the development of a weather support subsystem for Air Traffic Control

April 16, 1976
  |
Project Report
Author:
Steven I. Krich
…
Published in:
MIT Lincoln Laboratory Report ATC-64
Topic:
weather
R&D area:
R&D group:

Summary

This report summarizes the results of a study to: (1) investigate the primary needs of air traffic controllers, flow controllers, and central flow controllers for weather information, (2) define a cost effective system concept to meet these needs, and (3) lay out a plan for the development of the proposed weather subsystem to support Air Traffic Control. The recommended system will provide rapid geration and dissemination of reliable use oriented observations and very short range severe weather forecasts (up to 30 min.) to facilitate controller planning. This new capability will: 1) reduce weather induced controller work load peaks, 2) permit controllers to coordinate and preplan aircraft rerouting for weather avoidance, 3) achieve an improved balance between the inefficiency of overreaction and the essentials of safety, 4) facilitate controller response to pilot requests for weather data on a work load permitting basis, and 5) enable the issuance of accurate weather advisories. The system will also provide rapid generation and dissemination of reliable short range forecasts (up to 4 hours) to permit early introduction of necessary flow control procedures. This new capability will: 1) decrease problems for controllers, 2) increase acceptance of flow control, and 3) increase traffic flow efficiency without decreasing safety.
READ LESS

Summary

This report summarizes the results of a study to: (1) investigate the primary needs of air traffic controllers, flow controllers, and central flow controllers for weather information, (2) define a cost effective system concept to meet these needs, and (3) lay out a plan for the development of the proposed...

READ MORE
Concept and plan for the development of a weather support subsystem for Air Traffic Control

Multipath parameter computations for the MLS simulation computer program

April 8, 1976
  |
Project Report
Author:
Jack Capon
Published in:
MIT Lincoln Laboratory Report ATC-68
Topic:
L-band
R&D area:
R&D group:

Summary

A set of mathematical models and computer programs have been developed to characterize multipath propagation in an airport environment. When combined with system mathematical models, these models are intended to provide a firm technical basis for assessing the performance of candidate Microwave Landing Systems (MLS) in realistic airport environments. The two paramount issues in developing these models have been 1) validation based on actual field test data and 2) computer running time. The obstacles modeled include buildings and aircraft, as well as the ground which can cause both specular reflections and diffuse scattering. In addition, the shadowing effects due to runway humps, and aircraft, buildings approaching the line of sight between transmitter and receiver are included. Computational procedures are presented for obtaining the salient multipath parameters, i.e., relative magnitude, phase, directional angles, Doppler frequency, and time delay. Computer programs have been written for these algorithms using the Fortran programming language, with structured programming methods, such as Iftran, employed whenever possible. A presentation is given of computer validation data for the computational procedures. A comparison of these computer validation results with experimental field data demonstrates good agreement in all cases of interest. The computer running time for these computer programs is quite reasonable, e.g., it takes about five times longer than actual flight time to run a model of typical airport environment on an IBM 370 model 168.
READ LESS

Summary

A set of mathematical models and computer programs have been developed to characterize multipath propagation in an airport environment. When combined with system mathematical models, these models are intended to provide a firm technical basis for assessing the performance of candidate Microwave Landing Systems (MLS) in realistic airport environments. The...

READ MORE
Multipath parameter computations for the MLS simulation computer program

The Airborne Measurement Facility (AMF) system description

March 25, 1976
  |
Project Report
Author:
George V. Colby
Published in:
MIT Lincoln Laboratory Report ATC-60
Topic:
air traffic control
R&D area:
R&D group:

Summary

The Airborne Measurement Facility (AMF) is a data collection and conversion system that provides a means for obtaining recorded data representing pulsed electromagnetic signals received on one of the two ATC radar beacon frequency bands that is selected for a given data collecting mission. The facility consists of two subsystems: (1) an airborne subsystem which collects and records data during flight, and (2) a ground playback facility which processes the data and transcribes it onto computer-compatible tape.
READ LESS

Summary

The Airborne Measurement Facility (AMF) is a data collection and conversion system that provides a means for obtaining recorded data representing pulsed electromagnetic signals received on one of the two ATC radar beacon frequency bands that is selected for a given data collecting mission. The facility consists of two subsystems...

READ MORE
The Airborne Measurement Facility (AMF) system description

Beacon CAS (BCAS) an integrated air/ground collision avoidance system

March 23, 1976
  |
Project Report
Author:
Vincent A. Orlando
…
Published in:
MIT Lincoln Laboratory Report ATC-62
Topic:
surveillance
R&D area:
R&D group:

Summary

BCAS is a DABS-based airborne collision avoidance system that exploits the feature of DABS discrete addressing and integral data link. This provides for a CAS with the unique capabilities of (1) cooperative threat resolution between BCAS and conflicting aircraft through the transmission of maneuver intent (to DABS-only aircraft) and tie breaking (with other BCAS aircraft) and (2) coordination of CAS activities with the ground ATC control function through the DABS air-ground-air data link. All beacon-equipped aircraft in the vicinity of the BCAS are detected. ATCRBS-equipped aircraft are interrogated using a special Mode C interrogation. DABS aircraft are detected passively through periodic squitters emitted by all DABS transponders. Squitter-detected aircraft are tracked on altitude and only those aircraft that represent a co-altitude threat are discretely interrogated to establish a range/altitude track. The use of discrete addressing eliminates synchronous garble for the BCAS in the same manner as for DABS. This document provides a general description of BCAS from the viewpoint of its operational features and then describes the avionics package required to achieve the capability.
READ LESS

Summary

BCAS is a DABS-based airborne collision avoidance system that exploits the feature of DABS discrete addressing and integral data link. This provides for a CAS with the unique capabilities of (1) cooperative threat resolution between BCAS and conflicting aircraft through the transmission of maneuver intent (to DABS-only aircraft) and tie...

READ MORE
Beacon CAS (BCAS) an integrated air/ground collision avoidance system

IPC design validation and flight testing - interim results

March 16, 1976
  |
Project Report
Author:
John W. Andrews
…
Published in:
MIT Lincoln Laboratory Report ATC-57
Topic:
air traffic control
R&D area:
R&D group:

Summary

Intermittent Positive Control, an automated aircraft collision avoidance system requiring the participation of the aircraft pilots involved, is being evaluated in a series of live flight tests. This document provides an interim summary of the results obtained in these flight tests. Results are given for IPC algorithm design evaluation flights (34) and for pilot interaction evaluation flights (14) flown from Hanscom Field, Bedford, Massachusetts between February and October, 1975.
READ LESS

Summary

Intermittent Positive Control, an automated aircraft collision avoidance system requiring the participation of the aircraft pilots involved, is being evaluated in a series of live flight tests. This document provides an interim summary of the results obtained in these flight tests. Results are given for IPC algorithm design evaluation flights...

READ MORE
IPC design validation and flight testing - interim results

DABS modulation and coding design - a summary

March 12, 1976
  |
Project Report
Author:
Thomas J. Goblick
Published in:
MIT Lincoln Laboratory Report ATC-52
Topic:
surveillance
R&D area:
R&D group:

Summary

The Discrete Address Beacon System (DABS) has been designed as an evolutionary replacement for the Air Traffic Control Radar Beacon System (ATCRBS). As with ATCRBS, DABS is a cooperative Air Traffic Surveillance System utilizing ground based sensors (interrogators) and airborne transponders. In addition to its surveillance function, DABS integrally accommodates ground-to-air and air-to-ground data link communication within the interrogations and replies. In DABS, each aircraft transponder may be individually interrogated, using its unique 24-bit address, giving the ground based interrogators freedom to schedule interrogations and replies to make efficient use of the channels essentially independent of the aircraft traffic distribution. The evolutionary constraint on DABS, requiring the capability for one-for-one replacement of ATCRBS ground sensors and transponders, dictated the need to maximize commonality between the two systems. Thus, the ATCRBS interrogation and reply frequencies (1030 and 1090 MHz) were prime candidates for DABS operating frequencies. This report presents the rationale for the selection of the DABS signalling waveforms and error control techniques. The main issues in arriving at the final link design were (1) affordable transponder cost, (2) electromagnetic compatibility with ATCRBS and TACAN, and (3) adequate performance in the channel environment, which includes interference from ATCRBS transmissions. The resulting DABS that of ATCRBS, and transmits ground-to-air data link messages with high reliability. This is accomplished without noticeably affecting ATCRBS performance, with less channel occupancy per target report than ATCRBS, and with transponders projected to cost approximately 160% of the cost of ATCRBS transponders.
READ LESS

Summary

The Discrete Address Beacon System (DABS) has been designed as an evolutionary replacement for the Air Traffic Control Radar Beacon System (ATCRBS). As with ATCRBS, DABS is a cooperative Air Traffic Surveillance System utilizing ground based sensors (interrogators) and airborne transponders. In addition to its surveillance function, DABS integrally accommodates...

READ MORE
DABS modulation and coding design - a summary

MLS multipath studies volume II: application of multipath model to key MLS performance issues

February 25, 1976
  |
Project Report
Author:
James E. Evans
…
Published in:
MIT Lincoln Laboratory Report ATC-63,II
Topic:
L-band
R&D area:
R&D group:

Summary

This report summarizes MLS multipath work carried out at Lincoln Laboratory from March 1974 to Sept. 30, 1975. The focus of the program is the development of realistic models for 1) the multipath in representative real world environments and 2) the multipath characteristic of candidate MLS techniques. These multipath and system models are used in a comprehensive computer simulation to predict the strengths and weaknesses of major MLS systems when subjected to representative real world environments. The report is organized into two volumes. Volume I describes the algorithms and validation of various portions of the program. In Volume II, the simulation (or selected portions thereof) is applied to key multipath related MLS issues. Mathematical models are given for the major MLS multipath sources (ground reflections, building and aircraft reflections, and shadowing by objects and humped runways), and it is shown that they agree (Doppler and scanning beam) considered in phase II of the U.S. MLS program are presented together with validation by comparison with theory and bench tests. Also presented are the results of a general study in motion averaging. The (validated) computer simulation (and portions thereof) is then applied to studying 1) the critical areas required by the TRSB system to avoid excessive reflection effects, 2) the expected TRSB performance of a specific TRSB system at Friendship International Airport (MD).
READ LESS

Summary

This report summarizes MLS multipath work carried out at Lincoln Laboratory from March 1974 to Sept. 30, 1975. The focus of the program is the development of realistic models for 1) the multipath in representative real world environments and 2) the multipath characteristic of candidate MLS techniques. These multipath and...

READ MORE
MLS multipath studies volume II: application of multipath model to key MLS performance issues
821-830 of 931