Publications
The Integrated Terminal Weather System (ITWS) storm cell information and weather impacted airspace detection algorithm
August 2, 1993
Conference Paper
Published in:
Fifth Int. Conf. on Aviation Weather Systems, 2-6 August 1993, pp. 40-44.
Topic:
R&D area:
R&D group:
Summary
The Integrated Terminal Weather System (ITWS) is an FAA-sponsored program (Sankey, 1993; Ducot, 1993) whose objective is to acquire data and products from a variety of weather sensors, integrate the data and create aviation weather products for users, such as Air Traffic (AT) controllers and traffic managers, pilots, and airline and airport operations managers. The goal of ITWS is to increase capacity at airports, reduce controller workload, and enhance safety. The objective of the ITWS Storm Cell Information (StoCel) and Weather Impacted Airspace (WIA) Detection products is to identify storm cell characteristics (echo top, echo bottom, presence of heavy rain, hail, etc.) and airspace that pilots are likely to avoid because it contains hazardous weather. The StoCel/WIA products rely on the integration of pencil-beam data and products and Air Surveillance Radar (ASR-9) Weather Channel data. ASR-9 radars are useful because they cover the entire airspace of interest, perform a volume update at roughly 30-second intervals, and will be the weather representation most widely available to the Air Traffic Control (ATC) community. On the other hand, the ASR-9 has a 4.8° fan beam which results in a vertical integration over the depth of a storm, so information on the vertical structure of storms is lost. In addition, the current ASR-9 Weather Channel may produce false weather regions during ducting or anomalous propagation (AP) conditions. Nearby WSR-88D radars also cover the entire airspace of interest and provide indications of storm vertical structure. However, the volume update rate is typically on the order of 5 to 10 minutes, depending on the scanning strategy. TDWR radars perform volume updates about every 2.5 to 3 minutes, but perform sector scans that do not cover the entire airspace. Integration of the data from these various sensors produces a product that is superior to a product based on any single sensor. Field tests of components of this algorithm were conducted at Dallas-Ft. Worth (DFW) and Orlando (MCO) International Airports during the summer of 1993. The objectives of these tests are to evaluate the technical performance of the algorithm and the validate the operational concept. This paper will describe the algorithm, and discuss the operational concept and functional requirements for the product. A summary of the results and experiences of the Summer 1993 field tests, and a preliminary evaluation of the performance of the algorithm based on off-line and real-time tests will be provided at the conference.
Summary
The Integrated Terminal Weather System (ITWS) is an FAA-sponsored program (Sankey, 1993; Ducot, 1993) whose objective is to acquire data and products from a variety of weather sensors, integrate the data and create aviation weather products for users, such as Air Traffic (AT) controllers and traffic managers, pilots, and airline...
READ MORE
Status of the Terminal Doppler Weather Radar with deployment underway
August 2, 1993
Conference Paper
Published in:
Proc. Fifth Int. Conf. on Aviation Weather Systems, 2-6 August 1993, pp. 32-34.
Topic:
R&D area:
R&D group:
Summary
The Federal Aviation Administration (FAA) initiated the Terminal Doppler Weather Radar (TDWR) program in the mid-1980's in response to the need for improved real-time hazardous weather (especially low-altitude wind shear) surveillance in the terminal area (Turnbull, et al., 1989). The initial focus for the TDWR was to provide reliable, fully automated Doppler radar detection of microbursts and gust fronts and 20-minute warning of wind shifts which could effect runway usage. Subsequent operational demonstrations have shown that the overall terminal situational awareness provided by the TDWR color Geographical Situation Display (GSD) depiction of wind shear locations, weather reflectivity and storm motion also yields substantial improvements in terminal operations efficiency for air traffic managers and for airlines. In this paper, we will describe the current status and deployment strategy for the operational systems and recent results from the extensive testing of the radar system concept and of the weather information dissemination approach.
Summary
The Federal Aviation Administration (FAA) initiated the Terminal Doppler Weather Radar (TDWR) program in the mid-1980's in response to the need for improved real-time hazardous weather (especially low-altitude wind shear) surveillance in the terminal area (Turnbull, et al., 1989). The initial focus for the TDWR was to provide reliable, fully...
READ MORE
Effects of metering precision and terminal controllability on runway throughput
July 1, 1993
Journal Article
Published in:
Air Traffic Control Q., Vol. 1, No. 3, July 1993, pp. 277-297.
Topic:
R&D area:
R&D group:
Summary
In order to efficiently use available runway capacity while avoiding undue congestion within terminal airspace, systems of flow control and en route metering have been implemented. Recent work in automation has attempted to extend traffic flow planning to provide precise scheduling of traffic flow within the terminal area itself (from the metering fixes to the runways). The goal of this more detailed terminal scheduling is more efficient runway utilization. This article addresses an important practical question regarding the degree of precision required from the en route portion of such systems in order to allow the terminal scheduler to achieve its throughput benefits. The answer to this question determines the sophistication and rigidity required of en route automation and addresses the question of whether the success of new terminal automation is contingent upon improvements in en route metering. The method of analysis is mathematical modeling and fast-time computer simulation. A crucial parameter is controllability, which expresses the largest flight delay that the terminal scheduling can impose within the airspace available to it. The analysis reveals that achievable run-way utilization depends upon the type of metering employed, the available controllability within the terminal, and the extent to which controllers can be expected to intervene to handle transient peaks in arrival rates that cannot be handled by the automation. The major conclusion of the study is that in order to fully utilize a runway, the standard deviation of the errors in arrival time at the metering fixes should be kept to about half the terminal controllability. For the airports studied, there seems to be sufficient controllability available to allow a terminal scheduler to operate the runways at essentially full capacity when a metering system, even with modest delivery precision, is operating in the en route area.
Summary
In order to efficiently use available runway capacity while avoiding undue congestion within terminal airspace, systems of flow control and en route metering have been implemented. Recent work in automation has attempted to extend traffic flow planning to provide precise scheduling of traffic flow within the terminal area itself (from...
READ MORE
Mode-S data link
June 1, 1993
Journal Article
Published in:
J. of ATC, June 1993, pp. 34-37.
Topic:
R&D area:
R&D group:
Summary
Mode-S is an enhancement of the ATCRBS secondary surveillance radar (SSR) system which adds selective interrogation of individual aircraft, monopulse processing of the replies and a digital data link between the ground station and the aircraft. These features result in greatly improved surveillance accuracy, virtual elimination of synchronous garble of the replies from closely spaced aircraft, and provide a high capacity digital communication link for a wide variety of ground/air/ground messages.
Summary
Mode-S is an enhancement of the ATCRBS secondary surveillance radar (SSR) system which adds selective interrogation of individual aircraft, monopulse processing of the replies and a digital data link between the ground station and the aircraft. These features result in greatly improved surveillance accuracy, virtual elimination of synchronous garble of...
READ MORE
ATCRBS Reply Environment at Memphis International Airport
May 28, 1993
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-198
Summary
This report demonstrates, through data and analysis, how the airport environment can affect ATCRBS surveillance. The Lincoln Laboratory ATCRBS Monopulse Processing Subsystem was used to collect reply data at Memphis International Airport during March 1991. These data show a correlation between aircraft density, potential reflectors, and ATCRBS reply integrity. The number of replies has been shown to be directly related to multipath from reflecting surface, including taxiing aircraft. Additionally, it is shown that conditions can exist during which not all of the replies from ATCRBS equipped aircraft can be processed when forming target report measurements. Finally, it is shown that the bunching of replies in both time and space can introduce reply decoder overloading.
Summary
This report demonstrates, through data and analysis, how the airport environment can affect ATCRBS surveillance. The Lincoln Laboratory ATCRBS Monopulse Processing Subsystem was used to collect reply data at Memphis International Airport during March 1991. These data show a correlation between aircraft density, potential reflectors, and ATCRBS reply integrity. The...
READ MORE
Adjoint-method retrievals of microburst winds from TDWR data
May 24, 1993
Conference Paper
Published in:
26th Int. Conf. on Radar Meteorology, 24-28 May 1993, pp. 433-434.
Topic:
R&D area:
R&D group:
Summary
The simple adjoint (SA) method of Qiu and Xu (1992, henceforth referred to as QX92) was recently upgraded and tested with the Phoenix-II data for retrieving the low-altitude winds from single-Doppler scans (Xu et al. 1993a,b henceforth referred to as XQY93a,b). The major results can be briefly reviewed as follows: (i) Using multiple time-level data with the adjoint formulation makes the retrieval more accurate and less sensitive to the observational error. (ii) Imposing a weak nondivergence constraint can suppress the spurious divergence caused by the data noise and improve the retrieval. (iii) Retrieving the eddy coefficients improves the wind retrieval. (iv) Retrieving the time-man residual term improves the wind retrieval. Although the results in XQY93a,b were encouraging, the Phoenix-II data used in XQY93a,b were collected on non-storm days with chaff dispensed from an aircraft. The real challenge is to test the SA method with storm data. A microburst case is selected for the test in this paper.
Summary
The simple adjoint (SA) method of Qiu and Xu (1992, henceforth referred to as QX92) was recently upgraded and tested with the Phoenix-II data for retrieving the low-altitude winds from single-Doppler scans (Xu et al. 1993a,b henceforth referred to as XQY93a,b). The major results can be briefly reviewed as follows...
READ MORE
Anomalous propagation associated with thunderstorm outflows
May 24, 1993
Conference Paper
Published in:
Proc. 26th Int. Conf. on Radar Meteorology, 24-28 May 1993, pp. 238-240.
Topic:
R&D area:
Summary
Battan noted that ducting of radar energy by anomalous atmospheric refractive index profiles and resulting abnormally strong ground clutter can occur during three types of meteorological circumstance: (i) large scale boundary layer temperature inversions and associated sharp decrease in moisture with height -- these are often created by nocturnal radiative cooling; (ii) warm, dry air moving over cooler bodies of water, resulting in cooling and moistening of air in the lowest levels; (iii) cool, moist outflows from thunderclouds. In contrast to the first two types of anaomalous propagation (AP), radar ducting associated with thunderstorm outflows is quite dynamic and may mimic echoes from precipitating clouds in terms of spatial scale and temporal evolution. While non-coherent weather radars (e.g. WSR-57) are obviously susceptible to false storm indications from this phenomemenon, Doppler radars that select the level of ground clutter suppression based on "clear day maps" may also fail to suppress the AP-induced ground clutter echoes. Operational Doppler radar systems known to be susceptible to this phenomena are the National Weather Service's WSR-88D and the Federal Aviation Administration's Airport Surveillance Radar (ASR-9) six-level weather channel. In this paper, characteristics of thunderstorm outflow-generated AP are documented using data from a testbed ASR-9 operated at Orlando, Florida. The testbed radar's rapid temporal update (4.8 seconds per PPI scan) and accurate scan-to-scan registration of radar resolution cells enabled characterization of the spatial and temporal evolution of the AP-induced clutter echoes. We discuss implications of these phenomenological characteristics on operational systems, specifically the ASR-9. Algorithms for discrimination between true precipitation echoes and AP-induced ground clutter are discussed.
Summary
Battan noted that ducting of radar energy by anomalous atmospheric refractive index profiles and resulting abnormally strong ground clutter can occur during three types of meteorological circumstance: (i) large scale boundary layer temperature inversions and associated sharp decrease in moisture with height -- these are often created by nocturnal radiative...
READ MORE
Clutter filter design for multiple-PRT signals
May 24, 1993
Conference Paper
Published in:
Proc. 26th Int. Conf. on Radar Meteorology, 24-28 May 1993, pp. 235-237.
Summary
The trade-off of range vs. velocity ambiguity is fundamental and operationally significant for many S- and C-band pulsed Doppler weather radars. Transmission schemes using multiple pulse repetition times (PRTs) (i.e., nonuniform pulse spacing) offer the potential for extending the unambiguous measurement range by resolving intervals of velocity ambiguity. Unfortunately, multiple PRT methods can be problematic with low-elevation scanning when ground clutter removal is required. We have constructed both Chebyshev and mean-squared error (MSE) desing algorithms (Choroboy, 1993) that deal with design in the complex domain; the MSE algorithms are described below.
Summary
The trade-off of range vs. velocity ambiguity is fundamental and operationally significant for many S- and C-band pulsed Doppler weather radars. Transmission schemes using multiple pulse repetition times (PRTs) (i.e., nonuniform pulse spacing) offer the potential for extending the unambiguous measurement range by resolving intervals of velocity ambiguity. Unfortunately, multiple...
READ MORE
Coherent processing across multi-PRI waveforms
May 24, 1993
Conference Paper
Published in:
Proc. 26th Int. Conf. on Radar Meteorology, 24-28 May 1993, pp. 232-234.
Topic:
R&D area:
R&D group:
Summary
Meteorological Doppler radars have typically utilized constant pulse-repetition intervals (PRI) to facilitate clutter filtering and estimation of weather echo spectral moments via pulse-pair or periodogram-based algorithms. Utilization of variable PRIs to support resolution of velocity ambiguities has been discussed, for example by Banjanin and Zrnic, but not implemented owing to difficulties associated with clutter filter design. Recent work by Chornoboy presents design algorithms for time-varying finite impulse response (FIR) filters that achieve Chebyshev or mean-squared error (MSE) optimality when processing multi-PRI waveforms. This paper is a follow-on to that work, treating techniques for post-clutter filter processing (e.g. periodogram estimation) that are appropriate for such waveforms. Our approach involves a least-squares fitting of the signal - sampled at a nonuniform rate - to a weighted sum of uniformly spaces sinusoids. The sinusoids or "basis functions" are chosen to span a Nyquist interval consistent with the longest PRI in the transmitted waveform, and need not be centered at zero Doppler. Determination of the sinusoid weightings - effectively a discrete Fourier transformation (DFT) - and the associated residual between the harmonic fit and the data area accomplished via multiplications of the signal vector with precomputed matrices. The resulting spectrum estimate can be used directly for weather echo moment calculations, or can be inverse-Fourier transformed using conventional techniques to generate a time-domain signal representation. This work has been motivated by a specific application - estimation of weather spectrum moments for a Wind Shear Processor (WSP) modification to the Federal Aviation Administration's Airport Surveillance Radar (ASR-9). Our approach supports candidate low-altitude radial wind estimation algorithms that operate on frequency-domain signal representations and require that the radar's block-stagger PRI and the possibility of velocity ambiguities be accounted for in generating the spectrum estimates. In principle, however, these processing techniques are also applicable to weather radar systems such as WSR-88D and Terminal Doppler Weather Radar (TDWR) where range and Doppler ambiguities are an operational concern.
Summary
Meteorological Doppler radars have typically utilized constant pulse-repetition intervals (PRI) to facilitate clutter filtering and estimation of weather echo spectral moments via pulse-pair or periodogram-based algorithms. Utilization of variable PRIs to support resolution of velocity ambiguities has been discussed, for example by Banjanin and Zrnic, but not implemented owing to...
READ MORE
Preliminary results of the weather testing component of the Terminal Doppler Weather Radar operational test and evaluation
May 24, 1993
Conference Paper
Published in:
Proc. 26th Int. Conf. on Radar Meteorology, 24-28 May 1993, pp. 29-34.
Summary
The Terminal Doppler Weather Radar (TDWR) system which has been developed by Raytheon Co. for the Federal Aviation Administration (FAA), provides automatic detection of microbursts and low-altitude wind shear. Microburst- and gust front-induced wind shear can result in a sudden, large change in airspeed which can have disastrous effect on aircraft performance. during take off or landing. The second major function of TDWR is to improve air traffic management through forecasts of wind shifts, precipitation and other weather hazards. The TDWR system generates Doppler velocity, reflectivity, and spectrum width data. The base data are automatically dealiased and clutter is removed through filtering and mapping. Precipitation and windshear products, such as microbursts and gust fronts, are displayed as graphic products on the Geographic Situation Display which is intended for use by Air Traffic Control supervisors. Alphanumeric messages indicating the various windshear alerts and derived airspeed losses and gains are sent to a flat panel ribbon display which is used by the controllers in the control tower. The TDWR proof-of-concept and operational feasibility have been demonstrated in a number of FAA-sponsored tests and evaluations conducted by Massachusetts Institute of Technology's Lincoln Laboratory (MIT/LL) in Memphis, TN (1985); Huntsville, AL (1986); Denver, CO (1987, 1988); Kansas City, MO (1989, and Orlando, FL (1990-1992). In order to verify that the TDWR meets FAA operational suitability and effectiveness requirements, an Operational Test & Evaluations (OT&E) was conducted at the Oklahoma City site during the period from 24 August to 30 October 1992. The testing addressed National Airspace System (NAS)-SS-1000 requirements, weather detection performance, safety, operational system performance, maintenance, instruction books, Remote Maintenance Monitoring System (RMMS), system adaptable parameters, bullgear wear, and limited Air Traffic (AT) suitability. The TDWR OT&E Integration and Operational testing was conducted using a variety of methods dependent on the area being tested. This paper discusses primarily the weather detection performance testing. A rough analysis was performed on the algorithm output and the base data to determine the performance of the TDWR in detecting wind shear phenomena. Final results will be available after additional testing, which is scheduled for Spring of 1993, and post analysis in conducted.
Summary
The Terminal Doppler Weather Radar (TDWR) system which has been developed by Raytheon Co. for the Federal Aviation Administration (FAA), provides automatic detection of microbursts and low-altitude wind shear. Microburst- and gust front-induced wind shear can result in a sudden, large change in airspeed which can have disastrous effect on...
READ MORE